MaxiVideo MV105/108

Finding dead or malfunctioning coils and plugs can be hard work. The GTC505 makes ignition troubleshooting quick, easy, and painless. It’ll help you, and the people depending on you, get moving again!

The GTC505 is the product of 20 years of work (by GTC) on ignition diagnostics. This tool will tell you exactly what’s going on with any spark ignition system as soon as you put its sensor by your coil (or spark plug wire). Swapping coils and other components in and out until you figure out what’s wrong is slow, tedious, and wasteful. The GTC505 will take the guesswork out, so you can be confident that the problem will be solved on your first try.

Description

Who it’s For:

• Marine outboard mechanics
• Gasoline inboard mechanics
• Small engine repair shops doing fault diagnostics
• Motorcycle technicians doing diagnostics or aftermarket modification
• Automotive technicians looking for a GTC505 with all the extras

What it Does:

Quickly and easily detects engine RPM and spark parameters. Useful for checking for ignition system faults and misfires, or for tuning and aftermarket modifications.

How it Works:

1. Connect the appropriate sensor
2. Turn the unit on
3. Position the sensor near the ignition module or wire
4. Check the engine RPM, spark peak voltage, burn time, and dwell angle/ramp time. The digital view gives you a quick look at the average, and the chart view will show you any misfires.

Warranty & Support:

Covered by our standard 1-year warranty, and supported for much longer. Replacement parts and accessories are generally available for 10+ years.

جهاز محلل نظام الإشعال GTC505M

يُعد GTC505M أداة احترافية مصممة لتحليل وتشخيص أنظمة الإشعال في المحركات. يُستخدم بكفاءة لتحديد مشاكل الإشعال في أنواع مختلفة من المحركات، بما في ذلك الأنظمة التقليدية والإلكترونية وأنظمة الإشعال بدون موزع.

المميزات الرئيسية:

1. تحليل شامل لنظام الإشعال:

   • يقيس ويعرض البيانات في الوقت الفعلي، بما في ذلك الجهد الكهربائي (kV) وعدد دورات المحرك (RPM) ومدة الشرارة.
   • يوفر تحليلًا تفصيليًا للأشكال الموجية للحصول على رؤية واضحة لأداء نظام الإشعال.

2. توافق واسع:

   • مناسب لتشخيص مشاكل الإشعال في السيارات والدراجات النارية والمحركات الصغيرة وحتى المحركات البحرية.
   • متوافق مع أنظمة الإشعال ذات الكويل المدمج (COP) وأنظمة الإشعال التقليدية بالموزع.

3. شاشة متقدمة:

   • مزود بشاشة ملونة عالية الدقة لعرض الأشكال الموجية والقياسات بوضوح.
   • واجهة سهلة الاستخدام مع أزرار لتحويل الوضع وعرض البيانات.

4. أنماط اختبار متعددة:

   • وضع دورة القياس لمراقبة عدة أسطوانات.
   • وضع قياس الجهد الكهربائي ومدة الشرارة لضمان عمل نظام الإشعال بكفاءة.

5. تصميم متين:

   • هيكل مقاوم للصدمات ومناسب لبيئات الورش القاسية.
   • خفيف الوزن وسهل الحمل للاستخدام المريح.

6. وظيفة تثبيت البيانات:

   • يمكن للمستخدمين تجميد الشاشة لتحليل القراءات بشكل أكثر دقة.

الاستخدامات:

• تشخيص مشاكل الإشعال مثل التوقف المفاجئ أو الشرارات الضعيفة أو فشل الكويل.
• التحقق من عمل شمعات الإشعال ومستوى الجهد.
• استكشاف مشاكل توقيت الإشعال وكفاءة النظام.
• ضمان تناسق عدد دورات المحرك وجودة الشرارة عبر جميع الأسطوانات.

الفوائد:

• تشخيص دقيق: يحدد مشاكل الإشعال بسرعة، مما يوفر الوقت والجهد.
• زيادة الكفاءة: يساعد على تحسين أداء المحرك من خلال ضمان عمل نظام الإشعال بشكل مثالي.
• سهولة التشغيل: مصمم ليكون مناسبًا للميكانيكيين المحترفين وهواة السيارات.

هذه الأداة ضرورية لأي شخص يعمل في مجال صيانة وتشخيص المحركات. إذا كنت بحاجة إلى مزيد من التفاصيل أو المواصفات، لا تتردد في التواصل!

Description

The TA110 Laser Tachometer and counter can be used to measure and test the number of rotations per minute (RPM) or total number of rotations or events on any spinning shaft, pulley, wheel, drive belt, fan, or other rotating objects in general, safely, accurately and easily due to its unique ergonomic design. Numerous application uses can be found in industrial, automotive, heavy duty, HVAC, agricultural and aviation maintenance sectors.

Wide measuring range: 60 to 99,999 RPM or count, 2″ to 20″ reading distance, Min/max memory recall, backlit display, <0.3 sec response time, count function and auto power off.

Applications

• Internal combustion engines
• Electric motors
• Rotating machinery

Features

• State of the Art patented ergonomic design
• Measures from 60 to 99999 RPM
• 0.05 % accuracy
• 2 to 20″ (50 to 500 mm) measuring range
• Quick selection between RPM and Count functions
• Maximum and minimum memory recall functions
• Continuous reading and data hold modes
• Quick response: <0.3 seconds
• Large LCD display with symbols and backlight
• On target display indicator
• RPM, Total revolutions, maximum, minimum and last reading memory
• Laser powered optical system is easy to use under all light conditions
• Only setup required is a reflective mark on the rotating part

Specifications

• Display:
• 5 x 0.7″ (16mm)digits display
• Backlight
• On target indicator
• RPM indicator
• Low battery indicator
• Accuracy: ±(0.05%+1 Digit)
• Operating Temperature: 32°F to 122°F (0°C to 50°C)
• Response time: >0.3 sec.(over 120 RPM)
• Range Selection: Auto Ranging
• Memory: Max. value, Min. value and display hold stored automatically in memory
• Distance to target: 2″ to 20″ (50 mm to 500 mm)
• Laser Pointer: Laser Diode, < 1mW output wavelength 630-670 nm, Class II
• Power Source: 9-volt alkaline battery type NEDA 1604
• Battery life: Approx. 5 hours.(w/alkaline batteries)
• Dimensions: 3.13″x 1.88″x 7.0″ (80 x 48 x 178 mm)
• Weight: 7.6 oz. (215 g) including battery

How-To

• Attach a small piece of reflective tape to the shaft or rotating part, aim the laser beam to the reflective mark and read the RPM or revolutions count on the large display.
• Maximum, minimum and last reading are automatically saved into the internal memory of the instrument, and can be recalled at any time
• Bright and powerful laser optical system allows for easy targeting of rotating shaft, wheel, etc., even in bright daylight.
• Measurement can be obtained from safe and comfortable distances from 2″ to 200″

The large 5 digits digital display allows measurements of up to 99,999 RPM without need to switch scales or multiply readings.

3

• HANDHELD: Single hand range and scale selection while testing
• EASY TO READ: Large easy to read 1/2″ (12.5 mm) digits display
• ERGONOMIC: Comfortable grip allows holding as a pen or a handle
• DURABLE: Rugged plastic enclosure
• 1-YEAR WARRANTY

Description

This meter offers an easy and portable solution for troubleshooting electrical and electronic circuits and systems. With its large and easy to read display, you can use this device with one hand and keep sight of your testing point while reading the display. You can measure outputs in sensors, check grounds, voltage drops, and continuity across cables, and check components like alternators, diodes, fuses, and more.

Applications

• Measure output in sensors like Oxygen (O2), Coolant Temperature, Throttle Position (TPS), Manifold Air, Pressure (MAP), Manifold Air Flow (MAF), etc.
• Check grounds, Voltage drops and continuity across Connectors, Wires, Cables, Relays Contacts, Lamps, Switches, etc.
• Check components like Alternator, Diodes, Relays Coils, Condensers, Ignition Coils, Spark Plug Wires, Magnetic Pick-ups, Motors, Switches, Fuses, etc.
• An essential tool for all around troubleshooting of electrical and electronic circuit and systems

Specifications

• DC Voltage: ±0.8% + 1dgts., 1MOhm input impedance, 600 V ac/dc Overload protection
• AC Voltage: ±1.5% + 10 dgts., 450KOhm input impedance, 40 to 200 Hz, 600 V ac/dc Overload protection
• Resistance: ±1.0% + 3 dgts., 250 V ac/dc overload protection
• DC Current: ± 2.0 % + 2 dgts., Internal 200mA/250V fuse protection
• Diode test: 1.0 ± 0.6 mA test current, 3.2 V max. test voltage

Documents

 
  Download Manual (English)
 

Kit Manifest

• CT8012
• Probe protective cap
• Alligator clip adapter for test probe
• 1604A (9-volt alkaline) battery
• User’s manual

Proposition 65 Warning ⚠

This product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer, and Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm.