GM E90/T93 Upgrade Kit
ر.ع.180.47
Take full control of your truck’s performance with the GM E90/T93 Upgrade Kit!
Designed for 2019-2022 GM vehicles equipped with the E90 ECM (engine control module) and T93 TCM (transmission control module), this kit enables full tuning capability—without ever removing your controllers from the vehicle. Perform the upgrade quickly and easily from your own garage or shop. See full vehicle compatibility list below.
pgrade Your E90 ECM and T93 TCM Right in Your Garage or Shop
The new E90/T93 ECM Upgrade Kit empowers DIY enthusiasts and professional tuners to perform the ECM upgrade on compatible GM vehicles right at home or in the shop.
The key advantage? No need to remove the ECM from the vehicle! This eliminates the risk of damaging delicate components during removal and reinstallation.
This kit also eliminates the need for complex reprogramming or relearns. With this upgrade, you’ll gain full tuning access through HP Tuners’ VCM Suite, allowing you to optimize performance for the supported GM vehicles.
As of March 17th, 2026, users no longer need to upgrade the GM T93 TCM with a send-in service or this upgrade kit. Simply license and tune the controller as normal. The GM E90 ECM still requires to be upgraded with this kit or the send-in service.
Important Notes:
- Approximate time to upgrade each controller is as little as 20 minutes!
- Once upgraded, experience the quickest write times in the industry—approximately 6 minutes!
- No relearns/reprogramming required:
- No IMMO relearn
- No crank relearn
- No need to perform “Replace ECM” function
- Additional required products:
- MPVI4 or MPVI3 device (with its supplied USB A to C cable)
- Latest version of VCM Suite (BETA)
- Once you’re ready to write your new tune file, you must first license the vehicle. See credit licensing costs on the vehicle page.
Note: Credits are not included in this kit and must be purchased separately.
What’s in the kit?
- HPTNet cable – GM E90 ECM
- HPTNet Cable – GM T93 TCM
- Upgrade box
- Upgrade cable
Vehicle Compatibility:
The GM E90/T93 Upgrade Kit is designed for GM vehicles equipped with the E90 ECM and/or T93 TCM.
GM E90 ECM Support:
- 2019-2022 Chevrolet Silverado 1500 & GMC Sierra 1500 (5.3L & 6.2L V8 – L84/L87)
- Pre-facelift models (non-Global B)
GM T93 TCM Support: The GM T93 TCM no longer needs to be upgraded. Simply license and tune as normal directly via the OBDII port.
- Various 2019+ GM vehicles equipped with 8-speed and 10-speed transmissions (non-Global B), including:
- 2020+ Chevrolet Camaro
- 2019-2022 Chevrolet Silverado 1500/GMC Sierra 1500 (5.3L, 6.2L Gas, 3.0L Duramax)
- 2020-2023 Chevrolet Silverado 2500HD/3500HD (6.6L L5P)
Only 2 left in stock
Take full control of your truck’s performance with the GM E90/T93 Upgrade Kit!
Designed for 2019-2022 GM vehicles equipped with the E90 ECM (engine control module) and T93 TCM (transmission control module), this kit enables full tuning capability—without ever removing your controllers from the vehicle. Perform the upgrade quickly and easily from your own garage or shop. See full vehicle compatibility list below.
pgrade Your E90 ECM and T93 TCM Right in Your Garage or Shop
The new E90/T93 ECM Upgrade Kit empowers DIY enthusiasts and professional tuners to perform the ECM upgrade on compatible GM vehicles right at home or in the shop.
The key advantage? No need to remove the ECM from the vehicle! This eliminates the risk of damaging delicate components during removal and reinstallation.
This kit also eliminates the need for complex reprogramming or relearns. With this upgrade, you’ll gain full tuning access through HP Tuners’ VCM Suite, allowing you to optimize performance for the supported GM vehicles.
As of March 17th, 2026, users no longer need to upgrade the GM T93 TCM with a send-in service or this upgrade kit. Simply license and tune the controller as normal. The GM E90 ECM still requires to be upgraded with this kit or the send-in service.
Important Notes:
- Approximate time to upgrade each controller is as little as 20 minutes!
- Once upgraded, experience the quickest write times in the industry—approximately 6 minutes!
- No relearns/reprogramming required:
- No IMMO relearn
- No crank relearn
- No need to perform “Replace ECM” function
- Additional required products:
- MPVI4 or MPVI3 device (with its supplied USB A to C cable)
- Latest version of VCM Suite (BETA)
- Once you’re ready to write your new tune file, you must first license the vehicle. See credit licensing costs on the vehicle page.
Note: Credits are not included in this kit and must be purchased separately.
What’s in the kit?
- HPTNet cable – GM E90 ECM
- HPTNet Cable – GM T93 TCM
- Upgrade box
- Upgrade cable
Vehicle Compatibility:
The GM E90/T93 Upgrade Kit is designed for GM vehicles equipped with the E90 ECM and/or T93 TCM.
GM E90 ECM Support:
- 2019-2022 Chevrolet Silverado 1500 & GMC Sierra 1500 (5.3L & 6.2L V8 – L84/L87)
- Pre-facelift models (non-Global B)
GM T93 TCM Support: The GM T93 TCM no longer needs to be upgraded. Simply license and tune as normal directly via the OBDII port.
- Various 2019+ GM vehicles equipped with 8-speed and 10-speed transmissions (non-Global B), including:
- 2020+ Chevrolet Camaro
- 2019-2022 Chevrolet Silverado 1500/GMC Sierra 1500 (5.3L, 6.2L Gas, 3.0L Duramax)
- 2020-2023 Chevrolet Silverado 2500HD/3500HD (6.6L L5P)
You must be logged in to post a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
AUNCH X431 PRO3S+ Smartlink HD Scanner for Car & Truck (12&24V)
-
Intelligent Diagnostics with Module Topology on Select Vehicles, Enhanced Auto SCAN/ VIN Scan and DTC Analysis/ Repair Guided Assist
-
Factory-Level ECU Coding for ECU Matching, Learning, or code the newly replaced ECU; Customize your car, unfold the hidden features, or disable the annoying functions; Reprograms the adaptive data for certain components after repairs or replacements., Support J2534 ECU Programming for Mainstream Vehicles, for TOYOTA, HONDA, VOLVO, VW, BMW, Ford, GM, Mercedes, SUBRARU, CHRYLSER, LANDROVER, etc.
-
Bi-directional Control: Receive information and send commands to subsystem to perform active tests
-
60+ Service Functions, all in step-by-step instructions, solve all the service/ reset questions
-
Extensive vehicle coverage for more than 200+ US, Asian and European commercial vehicle makes,work for 12V &24 V with no extra FEE, FOR Cars, Trucks, buses, Trailers, Excavators, Diesel engine, Construction machinery, Pick-up, Hybrid vehicle, etc.
You can perform more comprehensive vehicle inspections with LAUNCH PRO3S+ SMARTLINK HD, need EXTRA-BUY.
-
Scopebox : Quickly acquire the circuit signal, and slowly display the waveform for better data analysis.
-
S2-2 Sensorbox: Specially designed to diagnose and simulator vehicle sensor faults quickly and conveniently.
-
S2-2 Multimeter: Allows you to measure the physical parameters such as voltage, resistance, frequency etc. It utilizes the same hardware as the S2-2 Sensorbox.
-
Videoscope: Allows you to check those unseen parts of engine, fuel tank, braking system. It needs to work with the compatible Videoscope device .
-
BST360 (Battery Tester): allows you to fix battery detection faster and easier. It needs to work with the specific Bluetooth battery tester .
-
TSGUN TPMS Device: allows you to configure the tablet as TPMS activation & diagnostic tool, which provides the ability to trigger TPMS sensor, p-r-o-g-ram TPMS sensor, perform the relearning procedure. It needs to work with the compatible TSGUN device .
-
X-PROG 3 Immobilizer Programmer: Allows you to perform the read-write function for vehicle k.e.ys,EEPROM, MCU, and EEPROM /FLASH of vehicle engine and gearbox ECU, this X431 diagnostic scanner providing fast, easy, and intuitive key pro-gramming for V.A.G group vehicles with 2/3/3.5 gen. IMMO, and most Asian cars with low-level antitheft systems; also to have completed IMMO & Key Programming (read & write 1200+ EEPROM and MCU chips, etc.) for VW/ Audi/ Skoda/ Seat models manufactured after 2008 with 4/ 5/ 5.5/ 6 gen.
-
Wi-Fi Printing: you can print your diagnosis and maintenance report directly by selecting "Print via Wi-Fi".
- New Energy Battery Pack: Supports reading the current SOC/SOH, cell/module voltage, input/output current and power, battery temperature, as well as reading the detailed status information and fault information of the battery pack, automatically calculating the total voltage, voltage difference, maximum/minimum voltage and other index data, automatically labeling the abnormal data, and quickly locating the battery pack problems for 130+New energy vehicles, include BMS_BYD, BMS_HD_BENZ, EV_AUDI, EV_BMW, EV_CHRYSLER, EV_GM, EV_HD_CAMC, EV_HD_GEELY, EV_HD_VOLVO, EV_HONDA, EV_TOYOTA, EV_TESLA, EV_RENAULT,etc.
- Mall service: Get more special function and advanced function.
VCX SE with out software
Dual mode intelligent remote diagnosis
- Super remote diagnosis only needs equipment networking to realize on-line diagnosis of the original factory.
- Compatible with remote diagnosis, it can support remote diagnosis of various special function equipment.
- The equipment can quickly access to the remote diagnosis platform with one key.
-
One device supports many original vehicle diagnostic softwares
- The hardware is updated synchronously with the VCI of the major original factories, and it fully supports the new models and new original software based on doip Ethernet diagnosis.
- Realize the original factory level diagnosis function of the world’s major brands, one equipment can replace many expensive OEM equipments.
- All kinds of advanced diagnosis and programming functions are completely consistent with the original factories, and the performance even exceeds the original factories.
- One click installation, original support driver and online upgrade, easy to use.
-
Highly integrated vehicle diagnostic interface
- High performance dual core processor: a doip network processor and a vehicle bus processor.
- Support 4-way can bus, 2-way K-line / L-line, realize multi protocol high-speed concurrent communication.
- Innovative OBD-II multi-channel communication hardware supports intelligent switching between traditional bus and doip network.
- It supports mapping vehicle doip Ethernet to WLAN to realize wireless Ethernet diagnosis.
- Host communication interface supports USB / RJ45 / WLAN and other interfaces, which is flexible and easy to use.
- Portable design with integrated OBD-II interface, plug and play.
- The usb-type-c interface with reinforcement design can be plugged in and out stably.
-
Meet the automotive industry standard design
- SAE-J2534-1/2 Pass-Thru with EURO 5
- ISO-22900 MVCI & D-PDU
- ISO-13400 DoIP
-
Brand
Model
Original diagnosis software
Support
BENZBenZ, Maybach, Smart, FUSOXENTRY Diagnosis & DAS & DTS
BMWBMW, Rolls Royce, MINIISTA-D/P & E-Sys & INPA
VWVolkswagen, SIAT, Skoda, Bentley, LamborghiniODIS & ODIS-Engineer
AUDIAudi
ODIS & ODIS-Engineer
JLRJaguar, Land RoverJLR Pathfinder
JLRJaguar, Land RoverJLR SDD
VOLVOVolvo
Volvo VIDA
GMChevrolet, Buick, Cadillac, Opel, HortonGM GDS2 & Tech2Win & RDS
FORDFord
FORD IDS
MAZDAMazda
MAZDA IDS
TOYOTAToyota, Lexus, SAINTOYOTA Techstream TIS
HONDAHonda, AcuraHONDA Diagnostic System HDS
SUBARUSubaru
Select Monitor SSM3/SSM4
SGW (Fiat, Jeep, Dodge, Chrysler, Maserati, Alfa,RAM)
A firewall of sorts, the SGW blocks unauthorized access and manipulation of vehicle networks and vital systems. FCA says the SGW was developed not to restrict access to diagnostic data but rather to restrict “the ability of non-registered and non-authenticated users to perform intrusive diagnostics such as bi-directional controls.” Beyond the prevention of bi-directional capability, which include calibrations, relearns and actuations, even the simple act of clearing a code is denied.
MaxiAP AP200
Smartphone All System Scan Tool App With Bluetooth OBD2 Adapter
The wireless diagnostic interface MaxiAP AP200 is a small interface adapter used to connect to a vehicle’s diagnostic connector (DLC) and connect with the Android or iOS device for vehicle data transmission, making your Android or iOS devices (hereinafter referred to as device or devices) a powerful diagnostic tool. The MaxiAP AP200 package includes a Bluetooth (BT) OBDII connector and a MaxiAP200 app. It is the perfect Do-It-Yourself tool for customers looking for quick and easy diagnostic functions of all systems. It is almost compatible with all vehicle models of European, Asian, and North America makes.
All OBDII functions are available and free
• One free vehicle’s software with the initial purchase
• Support up to 19 specific functions, including Oil Reset, EPB, BMS, SAS, DPF, TPMS, IMMO, etc.
• Expand coverage with additional in-app purchase
• Auto VIN technology identifies vehicles automatically
• Generate repair reports of tested vehicles and support PDF format for easy sharing and printing
• Keep records of vehicles tested previously
• 14 languages switch freely
OpenPort 2.0 Rev E OBD-II Diagnostic Interface
OpenPort 2.0 Rev E OBD-II Diagnostic Interface
The OpenPort 2.0 Rev E is a high-performance OBD-II diagnostic interface designed for professional and enthusiast vehicle tuning, data logging, and ECU flashing. Compatible with a wide range of vehicles, it provides reliable communication between your car's ECU and a computer for tuning and diagnostics.
Key Features:
✅ High-Speed USB Interface – Ensures fast and stable data transfer.
✅ OBD-II Compatibility – Works with most modern vehicles supporting OBD-II protocols.
✅ ECU Flashing & Tuning – Ideal for custom tuning, performance modifications, and remapping.
✅ Data Logging Support – Monitor and analyze real-time engine parameters.
✅ Firmware Upgradeable – Keeps your device updated with the latest improvements.
Package Includes:
✔ OpenPort 2.0 Rev E Interface – Transparent case for enhanced durability.
✔ USB to Mini-USB Cable – For seamless PC connection.
✔ Software DVD – Includes necessary drivers and tuning software.
Applications:
🔹 ECU reprogramming and remapping
🔹 DTC code reading and clearing
🔹 Performance tuning and monitoring
🔹 Data logging for advanced diagnostics
Perfect for car tuning professionals, performance enthusiasts, and automotive engineers, the OpenPort 2.0 Rev E is a must-have tool for unlocking your vehicle's full potential.
Reviews
There are no reviews yet.