Bitbox Toyota Denso Gen1 CAN
ر.ع.110.00
Toyota Denso NEC 76F00XX (FID: 24);
NEC 76F0038, 76F0039, 76F0040, 76F0070 and 76F0085.
The module supports:
— Software identification
— Virtual reading of the file or of the lastest software update
— Writing (update version or downgrade)
— Checksums and CVN correction
— Recovery from any state*
* This feature allows to recover a ECU damaged (with any tool) during CAN-Bus writing or Techstream updating. You don’t need any NBD/JTAG device, it can be done with a J2534 device via CAN-Bus in bootstrap mode. This feature allows easy recovery of ECUs, including LC200 4.5TD without opening the ECU and accessing to back side of PCB, including new ECUs without NBD/JTAG pins on PCB (for example Camry V50, Highlander 3.5 U50, etc.).
We will not respond to the claims about the inability to read a file from our server if we do not have it.
Out of stock
Toyota Denso NEC 76F00XX (FID: 24);
NEC 76F0038, 76F0039, 76F0040, 76F0070 and 76F0085.
The module supports:
— Software identification
— Virtual reading of the file or of the lastest software update
— Writing (update version or downgrade)
— Checksums and CVN correction
— Recovery from any state*
* This feature allows to recover a ECU damaged (with any tool) during CAN-Bus writing or Techstream updating. You don’t need any NBD/JTAG device, it can be done with a J2534 device via CAN-Bus in bootstrap mode. This feature allows easy recovery of ECUs, including LC200 4.5TD without opening the ECU and accessing to back side of PCB, including new ECUs without NBD/JTAG pins on PCB (for example Camry V50, Highlander 3.5 U50, etc.).
We will not respond to the claims about the inability to read a file from our server if we do not have it.
You must be logged in to post a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
AUNCH X431 PRO3S+ Smartlink HD Scanner for Car & Truck (12&24V)
-
Intelligent Diagnostics with Module Topology on Select Vehicles, Enhanced Auto SCAN/ VIN Scan and DTC Analysis/ Repair Guided Assist
-
Factory-Level ECU Coding for ECU Matching, Learning, or code the newly replaced ECU; Customize your car, unfold the hidden features, or disable the annoying functions; Reprograms the adaptive data for certain components after repairs or replacements., Support J2534 ECU Programming for Mainstream Vehicles, for TOYOTA, HONDA, VOLVO, VW, BMW, Ford, GM, Mercedes, SUBRARU, CHRYLSER, LANDROVER, etc.
-
Bi-directional Control: Receive information and send commands to subsystem to perform active tests
-
60+ Service Functions, all in step-by-step instructions, solve all the service/ reset questions
-
Extensive vehicle coverage for more than 200+ US, Asian and European commercial vehicle makes,work for 12V &24 V with no extra FEE, FOR Cars, Trucks, buses, Trailers, Excavators, Diesel engine, Construction machinery, Pick-up, Hybrid vehicle, etc.
You can perform more comprehensive vehicle inspections with LAUNCH PRO3S+ SMARTLINK HD, need EXTRA-BUY.
-
Scopebox : Quickly acquire the circuit signal, and slowly display the waveform for better data analysis.
-
S2-2 Sensorbox: Specially designed to diagnose and simulator vehicle sensor faults quickly and conveniently.
-
S2-2 Multimeter: Allows you to measure the physical parameters such as voltage, resistance, frequency etc. It utilizes the same hardware as the S2-2 Sensorbox.
-
Videoscope: Allows you to check those unseen parts of engine, fuel tank, braking system. It needs to work with the compatible Videoscope device .
-
BST360 (Battery Tester): allows you to fix battery detection faster and easier. It needs to work with the specific Bluetooth battery tester .
-
TSGUN TPMS Device: allows you to configure the tablet as TPMS activation & diagnostic tool, which provides the ability to trigger TPMS sensor, p-r-o-g-ram TPMS sensor, perform the relearning procedure. It needs to work with the compatible TSGUN device .
-
X-PROG 3 Immobilizer Programmer: Allows you to perform the read-write function for vehicle k.e.ys,EEPROM, MCU, and EEPROM /FLASH of vehicle engine and gearbox ECU, this X431 diagnostic scanner providing fast, easy, and intuitive key pro-gramming for V.A.G group vehicles with 2/3/3.5 gen. IMMO, and most Asian cars with low-level antitheft systems; also to have completed IMMO & Key Programming (read & write 1200+ EEPROM and MCU chips, etc.) for VW/ Audi/ Skoda/ Seat models manufactured after 2008 with 4/ 5/ 5.5/ 6 gen.
-
Wi-Fi Printing: you can print your diagnosis and maintenance report directly by selecting "Print via Wi-Fi".
- New Energy Battery Pack: Supports reading the current SOC/SOH, cell/module voltage, input/output current and power, battery temperature, as well as reading the detailed status information and fault information of the battery pack, automatically calculating the total voltage, voltage difference, maximum/minimum voltage and other index data, automatically labeling the abnormal data, and quickly locating the battery pack problems for 130+New energy vehicles, include BMS_BYD, BMS_HD_BENZ, EV_AUDI, EV_BMW, EV_CHRYSLER, EV_GM, EV_HD_CAMC, EV_HD_GEELY, EV_HD_VOLVO, EV_HONDA, EV_TOYOTA, EV_TESLA, EV_RENAULT,etc.
- Mall service: Get more special function and advanced function.
PROLINK for MPVI2/ 3
og vehicle data with your MPVI2 interface from an external sensor, like a wideband or boost pressure sensor, using the PROLINK cable.
https://www.hptuners.com/pub/Pro_Link_v1.pdf
OpenPort 2.0 Rev E OBD-II Diagnostic Interface
OpenPort 2.0 Rev E OBD-II Diagnostic Interface
The OpenPort 2.0 Rev E is a high-performance OBD-II diagnostic interface designed for professional and enthusiast vehicle tuning, data logging, and ECU flashing. Compatible with a wide range of vehicles, it provides reliable communication between your car's ECU and a computer for tuning and diagnostics.
Key Features:
✅ High-Speed USB Interface – Ensures fast and stable data transfer.
✅ OBD-II Compatibility – Works with most modern vehicles supporting OBD-II protocols.
✅ ECU Flashing & Tuning – Ideal for custom tuning, performance modifications, and remapping.
✅ Data Logging Support – Monitor and analyze real-time engine parameters.
✅ Firmware Upgradeable – Keeps your device updated with the latest improvements.
Package Includes:
✔ OpenPort 2.0 Rev E Interface – Transparent case for enhanced durability.
✔ USB to Mini-USB Cable – For seamless PC connection.
✔ Software DVD – Includes necessary drivers and tuning software.
Applications:
🔹 ECU reprogramming and remapping
🔹 DTC code reading and clearing
🔹 Performance tuning and monitoring
🔹 Data logging for advanced diagnostics
Perfect for car tuning professionals, performance enthusiasts, and automotive engineers, the OpenPort 2.0 Rev E is a must-have tool for unlocking your vehicle's full potential.
OBD2 Launch cabel 60 cm Extension
Whether you have lost or damaged your existing Launch OBD Extension Cable or have a completely different Diagnostic machine, This Ribbon style OBD extension cable works on all OBD bluetooth connectors to extend its length and also to add protection against damage to the Bluetooth adapter reducing the amount of times you have to plug and unplug the dongle from the vehicle which could be a costly repair if damaged
Reviews
There are no reviews yet.