211 Soldering Iorn

Description

Who it’s For:

• Automotive, marine, and heavy duty technicians who troubleshoot vehicle electronics and electrical systems
• Aftermarket installers looking to test or troubleshoot new equipment
• Technicians looking to test starter motors or large electrical loads like refrigeration units should look at our CM600.

What it Does:

Quickly and easily measures circuit current consumption, as well as voltages and resistances.

How it Works:

1. Turn the unit on by turning the selector wheel to the mode of interest
2. Position the CM100 near and parallel to the wire or cable, with the jaw closed
3. Press the zero/tare button to compensate for interference
4. Open the jaw, put it around the wire, and allow it to close
5. Read the circuit’s AC or DC current consumption off the high-contrast liquid crystal display

Warranty & Support:

Covered by our standard 1-year warranty, and supported for much longer. Replacement parts and accessories are generally available for 10+ years.

Applications

• Electronic and electrical circuits
• Automobiles
• Trucks
• Trailers
• Boats
• RVs
• All 0 to 100 Volt AC/DC powered circuits

Features

The CM100 low current clamp meter is designed to accurately measure current, current leaks (parasitic draws down to 1mA) and electrical loads from 1mA to 100 amp AC/DC and voltages from 0 to 600 AC/DC. The CM100 can be used on electric motors, fuel pumps, charging systems, electrical circuits, etc.

The small diameter (½ inch or 13mm) and narrow jaw makes it ideal for use in confined spaces and on small gauge wires. Other features include up to 600 volt AC/DC voltage, resistance measurement functions, audible continuity test, display hold and peak detector.

• ACCURATE MEASUREMENT: Measures electrical loads from 1mA to 100 amp AC/DC and voltages from 0 to 600 AC/DC.
• EASY TO READ AND USE: Large 4 digit LCD display, one touch auto-zero, and audio feedback.
• MULTI-PURPOSE: Check and troubleshoot grounds, voltage drops, currents in battery chargers, alternators, electrical loads, and more.
• DURABLE: Rugged plastic enclosure, 50 hours battery life, with a carrying case for safe storage.
• COMFORTABLE: Quality design offers comfortable handling, and a smaller jaw for ease of use.

• EASY TO INTERPRET: The sensor signal output is shown in real time on the bar graph, while a 2 digit alphanumeric display shows the sensor output cross count per second.
• QUICK DIAGNOSIS: Quickly determine whether the sensor is defective and needs replacement – press the test button and see results within seconds.
• DURABLE: Soft anti-slip rubber holster protects the instrument against impacts.
• 1-YEAR WARRANTY

https://i0.wp.com/gtc.ca/wp-content/uploads/2020/08/ST05-set.jpg?fit=1024%2C1024&ssl=1

• HANDHELD: Single hand range and scale selection while testing
• EASY TO READ: Large easy to read 1/2″ (12.5 mm) digits display
• ERGONOMIC: Comfortable grip allows holding as a pen or a handle
• DURABLE: Rugged plastic enclosure
• 1-YEAR WARRANTY

Description

This meter offers an easy and portable solution for troubleshooting electrical and electronic circuits and systems. With its large and easy to read display, you can use this device with one hand and keep sight of your testing point while reading the display. You can measure outputs in sensors, check grounds, voltage drops, and continuity across cables, and check components like alternators, diodes, fuses, and more.

Applications

• Measure output in sensors like Oxygen (O2), Coolant Temperature, Throttle Position (TPS), Manifold Air, Pressure (MAP), Manifold Air Flow (MAF), etc.
• Check grounds, Voltage drops and continuity across Connectors, Wires, Cables, Relays Contacts, Lamps, Switches, etc.
• Check components like Alternator, Diodes, Relays Coils, Condensers, Ignition Coils, Spark Plug Wires, Magnetic Pick-ups, Motors, Switches, Fuses, etc.
• An essential tool for all around troubleshooting of electrical and electronic circuit and systems

Specifications

• DC Voltage: ±0.8% + 1dgts., 1MOhm input impedance, 600 V ac/dc Overload protection
• AC Voltage: ±1.5% + 10 dgts., 450KOhm input impedance, 40 to 200 Hz, 600 V ac/dc Overload protection
• Resistance: ±1.0% + 3 dgts., 250 V ac/dc overload protection
• DC Current: ± 2.0 % + 2 dgts., Internal 200mA/250V fuse protection
• Diode test: 1.0 ± 0.6 mA test current, 3.2 V max. test voltage

Documents

 
  Download Manual (English)
 

Kit Manifest

• CT8012
• Probe protective cap
• Alligator clip adapter for test probe
• 1604A (9-volt alkaline) battery
• User’s manual

Proposition 65 Warning ⚠

This product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer, and Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm.