Value AC electronic Gauge
PRODUCT CHARACTERISTICS
Built-in temperature sensor
Pressure measurement range: 0 ~ 725 psi
Operating temperature: 10 ~ 90% RH
Weight: 1.2 Kg
Delivered in a box with 3 charging hoses 1/4 SAE blue, red and yellow equipped with valves
Refrigerants
R11 R123 R414B R600A R428A
R12 R124 R406A R744 R426A
R417A R13 R134a R407A R422A
R1234fy R437A R22 R290 R407C
R422D R424A R23 R401A R408A
R427A R434A R728 R32 RR401B
RR409A R502 R422B R113 R402A
R410A R507A R416A R114 R402B
R413A R508B R420A
Paintless Dent Repair (PDR) tool kit
aintless Dent Repair (PDR) tool kit, also known as a Paintless Dent Removal kit.
It's a comprehensive set of specialized tools used by auto body technicians to remove dents from vehicles (like cars and motorcycles) without needing to repaint the surface.
The main components you see in the kit are:
-
PDR Rods: The many long metal rods with various tips and handles. These are used to get behind the vehicle's body panels and carefully push the dent out from the inside.
-
Glue Pulling System: This includes the hot glue gun, glue sticks, and the plastic tabs (the blue and red pieces). A tab is glued to the center of the dent, and then a tool like the slide hammer (the T-shaped puller at the bottom) or a bridge puller is used to pull the dent out from the exterior.
-
Knockdown Hammer and Tap Downs: The small hammer and other plastic-tipped tools are used to gently tap down any high spots or crowns that may form around the dent during the repair process.
-
Carrying Case: The long black case is for storing and transporting the tools.
Heating bolt remover
Heating Bolt Remover (Induction Heater Kit)
Get seized bolts off in seconds — no open flame, no mess. This handheld induction heater focuses intense heat exactly where you need it, breaking rust bonds so nuts, bolts, and bearings release fast and safely.
Highlights
-
Flameless heat: Induction technology heats the fastener, not the air around it.
-
Fast results: Typically loosens rusted bolts in 10–30 seconds (depends on size/rust).
-
Safer than a torch: No open flame near fuel lines, interiors, wiring, or paint.
-
Precision coils: Multiple coil sizes for wheel studs, O₂ sensors, exhaust bolts, etc.
-
Protects nearby parts: Localized heat reduces collateral damage to rubber and trim.
-
Built for workshops: Rugged body, over-temp protection, and duty-cycle control.
What it’s for
-
Rusted nuts/bolts, exhaust hardware, wheel hub bolts, tie-rods
-
O₂ sensors, brake bleed screws, chassis and suspension fasteners
-
Badge/adhesive removal (with soft rope coil)
In the Box
-
Induction heater main unit
-
Coil set (common sizes: 8 / 10 / 12 / 14 / 17 / 20 mm)
-
Soft rope coil for irregular shapes/decals
-
Heat-resistant gloves
-
Carry case
-
User guide
Key Specs
-
Power: Workshop-grade (model options typically 1000–2000 W)
-
Input: 220–240 V, 50/60 Hz (GCC standard)
-
Duty cycle: Smart thermal protection; auto-cooldown
-
Controls: Trigger activation, status LEDs/indicator
-
Safety: Over-temp + short-circuit protection; insulated coils
If you’d like, I can tailor the specs exactly to your unit (Watts, coil sizes, cable length, case dimensions) — just share your model details.
How it Works (Quick)
-
Select a coil that fits snugly around the fastener.
-
Slip the coil over the nut/bolt and pull the trigger.
-
Heat for a few seconds until the rust bond breaks.
-
Crack it loose with a wrench — done.
Safety Notes
-
Wear heat-resistant gloves and eye protection.
-
Do not use near sensitive electronics without shielding.
-
Avoid heating pressurized or flammable components.
Warranty & Support
-
12-month workshop warranty (extendable).
-
Local support in Oman through Integrated Solution Trading.
SEO Snippet (for your product page)
Heating Bolt Remover (Induction Heater Kit) — Oman: Flameless induction heater for seized bolts and O₂ sensors. Fast, safe rust-busting in 10–30s. Coils included. Shop now from Integrated Solution Trading, Muscat.
