Heating bolt remover
ر.ع.131.25
Heating Bolt Remover (Induction Heater Kit)
Get seized bolts off in seconds — no open flame, no mess. This handheld induction heater focuses intense heat exactly where you need it, breaking rust bonds so nuts, bolts, and bearings release fast and safely.
Highlights
-
Flameless heat: Induction technology heats the fastener, not the air around it.
-
Fast results: Typically loosens rusted bolts in 10–30 seconds (depends on size/rust).
-
Safer than a torch: No open flame near fuel lines, interiors, wiring, or paint.
-
Precision coils: Multiple coil sizes for wheel studs, O₂ sensors, exhaust bolts, etc.
-
Protects nearby parts: Localized heat reduces collateral damage to rubber and trim.
-
Built for workshops: Rugged body, over-temp protection, and duty-cycle control.
What it’s for
-
Rusted nuts/bolts, exhaust hardware, wheel hub bolts, tie-rods
-
O₂ sensors, brake bleed screws, chassis and suspension fasteners
-
Badge/adhesive removal (with soft rope coil)
In the Box
-
Induction heater main unit
-
Coil set (common sizes: 8 / 10 / 12 / 14 / 17 / 20 mm)
-
Soft rope coil for irregular shapes/decals
-
Heat-resistant gloves
-
Carry case
-
User guide
Key Specs
-
Power: Workshop-grade (model options typically 1000–2000 W)
-
Input: 220–240 V, 50/60 Hz (GCC standard)
-
Duty cycle: Smart thermal protection; auto-cooldown
-
Controls: Trigger activation, status LEDs/indicator
-
Safety: Over-temp + short-circuit protection; insulated coils
If you’d like, I can tailor the specs exactly to your unit (Watts, coil sizes, cable length, case dimensions) — just share your model details.
How it Works (Quick)
-
Select a coil that fits snugly around the fastener.
-
Slip the coil over the nut/bolt and pull the trigger.
-
Heat for a few seconds until the rust bond breaks.
-
Crack it loose with a wrench — done.
Safety Notes
-
Wear heat-resistant gloves and eye protection.
-
Do not use near sensitive electronics without shielding.
-
Avoid heating pressurized or flammable components.
Warranty & Support
-
12-month workshop warranty (extendable).
-
Local support in Oman through Integrated Solution Trading.
SEO Snippet (for your product page)
Heating Bolt Remover (Induction Heater Kit) — Oman: Flameless induction heater for seized bolts and O₂ sensors. Fast, safe rust-busting in 10–30s. Coils included. Shop now from Integrated Solution Trading, Muscat.
In stock
Heating Bolt Remover (Induction Heater Kit)
Get seized bolts off in seconds — no open flame, no mess. This handheld induction heater focuses intense heat exactly where you need it, breaking rust bonds so nuts, bolts, and bearings release fast and safely.
Highlights
-
Flameless heat: Induction technology heats the fastener, not the air around it.
-
Fast results: Typically loosens rusted bolts in 10–30 seconds (depends on size/rust).
-
Safer than a torch: No open flame near fuel lines, interiors, wiring, or paint.
-
Precision coils: Multiple coil sizes for wheel studs, O₂ sensors, exhaust bolts, etc.
-
Protects nearby parts: Localized heat reduces collateral damage to rubber and trim.
-
Built for workshops: Rugged body, over-temp protection, and duty-cycle control.
What it’s for
-
Rusted nuts/bolts, exhaust hardware, wheel hub bolts, tie-rods
-
O₂ sensors, brake bleed screws, chassis and suspension fasteners
-
Badge/adhesive removal (with soft rope coil)
In the Box
-
Induction heater main unit
-
Coil set (common sizes: 8 / 10 / 12 / 14 / 17 / 20 mm)
-
Soft rope coil for irregular shapes/decals
-
Heat-resistant gloves
-
Carry case
-
User guide
Key Specs
-
Power: Workshop-grade (model options typically 1000–2000 W)
-
Input: 220–240 V, 50/60 Hz (GCC standard)
-
Duty cycle: Smart thermal protection; auto-cooldown
-
Controls: Trigger activation, status LEDs/indicator
-
Safety: Over-temp + short-circuit protection; insulated coils
If you’d like, I can tailor the specs exactly to your unit (Watts, coil sizes, cable length, case dimensions) — just share your model details.
How it Works (Quick)
-
Select a coil that fits snugly around the fastener.
-
Slip the coil over the nut/bolt and pull the trigger.
-
Heat for a few seconds until the rust bond breaks.
-
Crack it loose with a wrench — done.
Safety Notes
-
Wear heat-resistant gloves and eye protection.
-
Do not use near sensitive electronics without shielding.
-
Avoid heating pressurized or flammable components.
Warranty & Support
-
12-month workshop warranty (extendable).
-
Local support in Oman through Integrated Solution Trading.
SEO Snippet (for your product page)
Heating Bolt Remover (Induction Heater Kit) — Oman: Flameless induction heater for seized bolts and O₂ sensors. Fast, safe rust-busting in 10–30s. Coils included. Shop now from Integrated Solution Trading, Muscat.
You must be logged in to post a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Valve seat and guide cutting machine TS60
VALVE SEAT AND VALVE GUIDE CUTTING MACHINE
TS 60 IS HIGH PRECISION MACHINE FEATURING THE LATEST TECHNOLOGY INCORPORATING AIR-FLOAT AUTOMATIC CENTERING AND MOTORSPINDLE. AIR-FLOATED TABLE FIXTURE CAN MAKE THE MOVEMENT OF WORKPIECES MORE FLEXIBLE.
ESPECIALLY DEVELOPED FOR THE REPAIR OF SMALL MOTORCYCLE AND AUTOMOTIVE MULTIVALVE CYLINDER HEADS.
| Model | TS60 | |
| Machine capabilties | Max. Length of the cylinder head | 600mm/23.62inch |
| Max. Width of the cylinder head | 400mm/15.75inch | |
| Max. Height of the cylinder head | 450mm/15.72inch | |
| Corsswise workpiece tilting | +42~-15degress | |
| Machine Capacity dia. (min-max) | 16 – 60mm / 0.63 – 2.36inch | |
| Work head displacement | 8mm/0.32inch | |
| Travel of working table | Lengthwise | 400mm/15.75inch |
| Crosswise | 8mm/3.15inch | |
| Spindle | Max. spindle inclination | 5degress |
| Spindle Travel | 200mm/8inch | |
| Power of the spindle | 1.5KW | |
| Spindle rotation speed | 0 – 1000RPM | |
| Alimentations | Power supply | 380V – AC – 3PH – 50HZ |
| 220V – AC – 3PH – 60HZ | ||
| Air Supply max | 6Bar/87psi | |
| Max. Air flow | 300 per min/ 11CFM | |
| Level of noise at 400RPM | 72dba | |
| Level of noise at 1200RPM | 82dba | |
| Net Weight approx | 600kg/ 1320lbs | |
| Machine space requirements | Length | 1400mm/55.12inch |
| Width | 900mm/35.43inch | |
| Height | 2000mm/78.74inch | |
Multifunctional IGBT Inverter Aluminum Dent Pulling Machine FY-65L
With advanced welding power and control technology, FY-65L are specifically designed for aluminium panel repairs of BMW, Mercedes-Benz, Audi and Volvo amongst others. Whilst specially designed for aluminium body repair works, it is also suitable for use on other metals such as steel, copper and iron.
- With leading international inverter technology. Microprocessor control system optimizes the welding parameters. Due to the adoption of advanced digital control technology and user friendly design, all you have to do is select the welding current corresponding to the workpiece thickness to achieve the best weld quality.
- High precision power control system.
- Complete with two and four-kickstand crossbar lifters to accommodate any repair task for the whole aluminium car body.
- Suitable for dent pulling of aluminium and different kinds of car steels.
- High welding strength without damage to the metallic coatings and paint surfaces on the back.
- Digital display, simple to operate and easy to use.
- Able to weld 3mm-8mm aluminium stud bolts, steel stud bolts and aluminium washers.
- Additional aluminium MIG welder is available as an option
ECCOm PRO injector cleaner 6 cycliner GDI جهاز اختبار وتنظيف رشاشات البنزين
he EICOM ECM-X4/X6/X8 Pro is a professional gasoline injector testing and cleaning machine designed to ensure precision and efficiency in fuel injector maintenance. This advanced equipment is ideal for workshops, providing accurate diagnostics and effective cleaning for various injector types.
Key Features:
- Multi-Injector Testing: Capable of testing and cleaning up to six injectors simultaneously, saving time and increasing productivity.
- Digital Control Panel: Equipped with an easy-to-read digital display and intuitive controls, allowing technicians to perform tests and adjustments with ease.
- Ultrasonic Cleaning: Includes a built-in ultrasonic cleaning tank for thorough cleaning, ensuring injectors are free of carbon deposits and contaminants.
- Pressure Gauge: Features a pressure gauge to monitor fuel pressure during testing, ensuring precise measurements.
- Versatile Application: Suitable for different types of gasoline injectors, making it a versatile tool for a variety of vehicles.
This equipment is an essential asset for automotive service centers looking to provide reliable and efficient injector testing and cleaning services to their clients.
1.Main Machine
2.Luxury Accessories packing
list
3.Ultrasonic cleaner
4.Without cabinet
5.Big pump/external type
6.Dimension:
520mm*440mm*640mm
7.Weight: 28kg
8. 4.0 version
1.4.3 inch LCM screen color to show, Can show the
injector working dynamic. 2.With resistance testing, can show the date, with injector
working waveform and PMW to adjust the pressure. 3.With English, Spanish, Chinese lauguage, with 4G sd
card. 4 .Can test and clean GDI, FSI, SIDI, MPI SPFI, TBI, CFI, K-JET,LPG, Motorbike-injector. 5. Powerful external fuel pump for easy maintence and
long durability. 6. Can operate the auto static test, dynamic test and
selective test with the injecting dribbling, angles, atomization, uniformity of one or more (1-2) injectors, can
simulate any state of the vehicle to observe the complete
process of injectors
**جهاز اختبار وتنظيف رشاشات البنزين من EICOM - ECM-X4/X6/X8 Pro**
يعتبر جهاز EICOM ECM-X4/X6/X8 Pro جهازًا احترافيًا لاختبار وتنظيف رشاشات البنزين، مصممًا لضمان الدقة والكفاءة في صيانة الرشاشات. هذا الجهاز المتطور مثالي للورش ويوفر تشخيصات دقيقة وتنظيفًا فعالًا لمختلف أنواع الرشاشات.
**المميزات الرئيسية:**
- **اختبار متعدد للرشاشات**: قادر على اختبار وتنظيف ما يصل إلى ستة رشاشات في وقت واحد، مما يوفر الوقت ويزيد الإنتاجية.
- **لوحة تحكم رقمية**: مزود بشاشة عرض رقمية واضحة وأدوات تحكم سهلة الاستخدام، مما يسمح للفنيين بإجراء الاختبارات والتعديلات بسهولة.
- **تنظيف بالموجات فوق الصوتية**: يحتوي على خزان تنظيف بالموجات فوق الصوتية للتنظيف الشامل، مما يضمن إزالة الرواسب الكربونية والشوائب من الرشاشات.
- **مقياس ضغط**: يحتوي على مقياس ضغط لمراقبة ضغط الوقود أثناء الاختبار، مما يضمن قياسات دقيقة.
- **تطبيق متعدد الاستخدامات**: مناسب لأنواع مختلفة من رشاشات البنزين، مما يجعله أداة متعددة الاستخدامات لمجموعة متنوعة من المركبات.
يعد هذا الجهاز إضافة ضرورية لمراكز خدمة السيارات التي تسعى لتقديم خدمات اختبار وتنظيف الرشاشات بطريقة موثوقة وفعالة لعملائها.
Reviews
There are no reviews yet.