Vehicle Test Line (Suspension and brake checking)

Description

Who it’s For:

• Automotive, marine, and heavy duty technicians who troubleshoot vehicle electronics and electrical systems
• Aftermarket installers looking to test or troubleshoot new equipment
• Technicians looking to test starter motors or large electrical loads like refrigeration units should look at our CM600.

What it Does:

Quickly and easily measures circuit current consumption, as well as voltages and resistances.

How it Works:

1. Turn the unit on by turning the selector wheel to the mode of interest
2. Position the CM100 near and parallel to the wire or cable, with the jaw closed
3. Press the zero/tare button to compensate for interference
4. Open the jaw, put it around the wire, and allow it to close
5. Read the circuit’s AC or DC current consumption off the high-contrast liquid crystal display

Warranty & Support:

Covered by our standard 1-year warranty, and supported for much longer. Replacement parts and accessories are generally available for 10+ years.

Applications

• Electronic and electrical circuits
• Automobiles
• Trucks
• Trailers
• Boats
• RVs
• All 0 to 100 Volt AC/DC powered circuits

Features

The CM100 low current clamp meter is designed to accurately measure current, current leaks (parasitic draws down to 1mA) and electrical loads from 1mA to 100 amp AC/DC and voltages from 0 to 600 AC/DC. The CM100 can be used on electric motors, fuel pumps, charging systems, electrical circuits, etc.

The small diameter (½ inch or 13mm) and narrow jaw makes it ideal for use in confined spaces and on small gauge wires. Other features include up to 600 volt AC/DC voltage, resistance measurement functions, audible continuity test, display hold and peak detector.

• ACCURATE MEASUREMENT: Measures electrical loads from 1mA to 100 amp AC/DC and voltages from 0 to 600 AC/DC.
• EASY TO READ AND USE: Large 4 digit LCD display, one touch auto-zero, and audio feedback.
• MULTI-PURPOSE: Check and troubleshoot grounds, voltage drops, currents in battery chargers, alternators, electrical loads, and more.
• DURABLE: Rugged plastic enclosure, 50 hours battery life, with a carrying case for safe storage.
• COMFORTABLE: Quality design offers comfortable handling, and a smaller jaw for ease of use.

Description

The TA110 Laser Tachometer and counter can be used to measure and test the number of rotations per minute (RPM) or total number of rotations or events on any spinning shaft, pulley, wheel, drive belt, fan, or other rotating objects in general, safely, accurately and easily due to its unique ergonomic design. Numerous application uses can be found in industrial, automotive, heavy duty, HVAC, agricultural and aviation maintenance sectors.

Wide measuring range: 60 to 99,999 RPM or count, 2″ to 20″ reading distance, Min/max memory recall, backlit display, <0.3 sec response time, count function and auto power off.

Applications

• Internal combustion engines
• Electric motors
• Rotating machinery

Features

• State of the Art patented ergonomic design
• Measures from 60 to 99999 RPM
• 0.05 % accuracy
• 2 to 20″ (50 to 500 mm) measuring range
• Quick selection between RPM and Count functions
• Maximum and minimum memory recall functions
• Continuous reading and data hold modes
• Quick response: <0.3 seconds
• Large LCD display with symbols and backlight
• On target display indicator
• RPM, Total revolutions, maximum, minimum and last reading memory
• Laser powered optical system is easy to use under all light conditions
• Only setup required is a reflective mark on the rotating part

Specifications

• Display:
• 5 x 0.7″ (16mm)digits display
• Backlight
• On target indicator
• RPM indicator
• Low battery indicator
• Accuracy: ±(0.05%+1 Digit)
• Operating Temperature: 32°F to 122°F (0°C to 50°C)
• Response time: >0.3 sec.(over 120 RPM)
• Range Selection: Auto Ranging
• Memory: Max. value, Min. value and display hold stored automatically in memory
• Distance to target: 2″ to 20″ (50 mm to 500 mm)
• Laser Pointer: Laser Diode, < 1mW output wavelength 630-670 nm, Class II
• Power Source: 9-volt alkaline battery type NEDA 1604
• Battery life: Approx. 5 hours.(w/alkaline batteries)
• Dimensions: 3.13″x 1.88″x 7.0″ (80 x 48 x 178 mm)
• Weight: 7.6 oz. (215 g) including battery

How-To

• Attach a small piece of reflective tape to the shaft or rotating part, aim the laser beam to the reflective mark and read the RPM or revolutions count on the large display.
• Maximum, minimum and last reading are automatically saved into the internal memory of the instrument, and can be recalled at any time
• Bright and powerful laser optical system allows for easy targeting of rotating shaft, wheel, etc., even in bright daylight.
• Measurement can be obtained from safe and comfortable distances from 2″ to 200″

The large 5 digits digital display allows measurements of up to 99,999 RPM without need to switch scales or multiply readings.

3