TOPDON RLink J2534 Pass-Thru Programmer OEM Diagnostic & Reprogramming Tool
ر.ع.120.00
TOPDON RLink J2534 Pass-Thru Programmer
The TOPDON RLink J2534 is a compact OEM J2534 dongle for workshops that need a stable wired interface for OEM diagnostics, ECU programming, coding, and repair workflows. It connects a Windows PC to the vehicle through the OBD interface and is designed for use with separate OEM software subscriptions.
Key Features
- Fully supports J2534 protocols for OEM reprogramming and diagnostic functions.
- Includes advanced D-PDU, CAN-FD, and DoIP protocol support for modern vehicles.
- Supports all-system diagnostics, repair guide access, ECU coding, reset services, and cloud-based programming when used with compatible OEM software.
- RLink Platform provides driver management, OEM driver access, and lifetime free updates.
- Stable wired connection helps reduce latency and improve reliability during ECU work.
- Compact and lightweight design for workshop use.
Compatibility
Supports more than 13 major automotive brands, including Chrysler, Ford, GM, Nissan, Toyota, Honda, Subaru, Land Rover/Jaguar, Volvo, Wuling, Volkswagen/Audi, Benz, and BMW.
System Requirements
- Windows 7 64-bit, Windows 8 64-bit, Windows 10 64-bit, or Windows 11 64-bit.
- OEM software is not included and requires a separate subscription from the vehicle manufacturer.
Source reference: TOPDON official RLink J2534 product page.
Only 1 left in stock
TOPDON RLink J2534 Pass-Thru Programmer
The TOPDON RLink J2534 is a compact OEM J2534 dongle for workshops that need a stable wired interface for OEM diagnostics, ECU programming, coding, and repair workflows. It connects a Windows PC to the vehicle through the OBD interface and is designed for use with separate OEM software subscriptions.
Key Features
- Fully supports J2534 protocols for OEM reprogramming and diagnostic functions.
- Includes advanced D-PDU, CAN-FD, and DoIP protocol support for modern vehicles.
- Supports all-system diagnostics, repair guide access, ECU coding, reset services, and cloud-based programming when used with compatible OEM software.
- RLink Platform provides driver management, OEM driver access, and lifetime free updates.
- Stable wired connection helps reduce latency and improve reliability during ECU work.
- Compact and lightweight design for workshop use.
Compatibility
Supports more than 13 major automotive brands, including Chrysler, Ford, GM, Nissan, Toyota, Honda, Subaru, Land Rover/Jaguar, Volvo, Wuling, Volkswagen/Audi, Benz, and BMW.
System Requirements
- Windows 7 64-bit, Windows 8 64-bit, Windows 10 64-bit, or Windows 11 64-bit.
- OEM software is not included and requires a separate subscription from the vehicle manufacturer.
Source reference: TOPDON official RLink J2534 product page.
You must be logged in to post a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
AUNCH X431 PRO3S+ Smartlink HD Scanner for Car & Truck (12&24V)
-
Intelligent Diagnostics with Module Topology on Select Vehicles, Enhanced Auto SCAN/ VIN Scan and DTC Analysis/ Repair Guided Assist
-
Factory-Level ECU Coding for ECU Matching, Learning, or code the newly replaced ECU; Customize your car, unfold the hidden features, or disable the annoying functions; Reprograms the adaptive data for certain components after repairs or replacements., Support J2534 ECU Programming for Mainstream Vehicles, for TOYOTA, HONDA, VOLVO, VW, BMW, Ford, GM, Mercedes, SUBRARU, CHRYLSER, LANDROVER, etc.
-
Bi-directional Control: Receive information and send commands to subsystem to perform active tests
-
60+ Service Functions, all in step-by-step instructions, solve all the service/ reset questions
-
Extensive vehicle coverage for more than 200+ US, Asian and European commercial vehicle makes,work for 12V &24 V with no extra FEE, FOR Cars, Trucks, buses, Trailers, Excavators, Diesel engine, Construction machinery, Pick-up, Hybrid vehicle, etc.
You can perform more comprehensive vehicle inspections with LAUNCH PRO3S+ SMARTLINK HD, need EXTRA-BUY.
-
Scopebox : Quickly acquire the circuit signal, and slowly display the waveform for better data analysis.
-
S2-2 Sensorbox: Specially designed to diagnose and simulator vehicle sensor faults quickly and conveniently.
-
S2-2 Multimeter: Allows you to measure the physical parameters such as voltage, resistance, frequency etc. It utilizes the same hardware as the S2-2 Sensorbox.
-
Videoscope: Allows you to check those unseen parts of engine, fuel tank, braking system. It needs to work with the compatible Videoscope device .
-
BST360 (Battery Tester): allows you to fix battery detection faster and easier. It needs to work with the specific Bluetooth battery tester .
-
TSGUN TPMS Device: allows you to configure the tablet as TPMS activation & diagnostic tool, which provides the ability to trigger TPMS sensor, p-r-o-g-ram TPMS sensor, perform the relearning procedure. It needs to work with the compatible TSGUN device .
-
X-PROG 3 Immobilizer Programmer: Allows you to perform the read-write function for vehicle k.e.ys,EEPROM, MCU, and EEPROM /FLASH of vehicle engine and gearbox ECU, this X431 diagnostic scanner providing fast, easy, and intuitive key pro-gramming for V.A.G group vehicles with 2/3/3.5 gen. IMMO, and most Asian cars with low-level antitheft systems; also to have completed IMMO & Key Programming (read & write 1200+ EEPROM and MCU chips, etc.) for VW/ Audi/ Skoda/ Seat models manufactured after 2008 with 4/ 5/ 5.5/ 6 gen.
-
Wi-Fi Printing: you can print your diagnosis and maintenance report directly by selecting "Print via Wi-Fi".
- New Energy Battery Pack: Supports reading the current SOC/SOH, cell/module voltage, input/output current and power, battery temperature, as well as reading the detailed status information and fault information of the battery pack, automatically calculating the total voltage, voltage difference, maximum/minimum voltage and other index data, automatically labeling the abnormal data, and quickly locating the battery pack problems for 130+New energy vehicles, include BMS_BYD, BMS_HD_BENZ, EV_AUDI, EV_BMW, EV_CHRYSLER, EV_GM, EV_HD_CAMC, EV_HD_GEELY, EV_HD_VOLVO, EV_HONDA, EV_TOYOTA, EV_TESLA, EV_RENAULT,etc.
- Mall service: Get more special function and advanced function.
OBD Master millage correction
Hardware Advantages
1. Built-in VCI box
2. 5-inch touchscreen
3. Charge directly via OBD interface
4. Practical and high-end gift box
5. Industrial design with silicone case
Add “Help” Functions
1. including built-in testable vehicle models, upgrade announcement, features, help notes and wiring diagrams, etc
2. Carlist and upgrade announcement, all details are available on the device
3. Customers can look up the features or uniquely support functions on the device
4. Help notes: built-in help notes for each model or function
MaxiSYS MSOAK
MaxiSYS MSOAK
Oscilloscope Accessory Kit
The MSOAK, compatible with the MaxiFlash VCMI included with the MSUltra and MS919, and the MP408 4-channel oscilloscope (sold separately), includes the 65A AC/DC Current Clamp, 650A AC/DC Current Clamp, Coil On Plug Probe, HT Extension Lead (2pcs) and Battery Clip (2pcs), within a blow-molded carrying case. To enable screen reader support, press Ctrl+Alt+Z To learn about keyboard shortcuts, press Ctrl+slash
Compatible with the MSULTRA, MS919 & MP408
• Includes 65A AC/DC Current Clamp, 650A AC/DC Current Clamp, Coil on Plug Probe, HT Extension Lead (2pcs) and Battery Clip (2pcs)
• Includes Carrying Case
• Includes 1-Year Warranty
FCA to Access SGW Module
A firewall of sorts, the SGW blocks unauthorized access and manipulation of vehicle networks and vital systems. FCA says the SGW was developed not to restrict access to diagnostic data but rather to restrict “the ability of non-registered and non-authenticated users to perform intrusive diagnostics such as bi-directional controls.” Beyond the prevention of bi-directional capability, which include calibrations, relearns and actuations, even the simple act of clearing a code is denied.
Autel tablet users will be able to gain access to the SGW module, and perform previously restricted actions, by registering with AutoAuth, an authentication service. Shops can register through AutoAuth’s Internet-based registration portal for $50 a year. Up to six users can register under this initial fee, with additional users able to register for an additional nominal fee. The next step is for the shop to register its Autel tablets, up to 100 tools, on the site. Starting June 1, 2020, Autel will “push” the software to all North American market tablets with active software subscriptions. Users with tablets out of subscription, can purchase a Total Care Program software and warranty renewal through their authorized Autel dealer.
Reviews
There are no reviews yet.