RTD+
ر.ع.115.00
What is the MPVI2+?
Connect > It is an OBDII interface tool that connects VCM Suite to your vehicle’s various control modules. Read > Diagnose and clear trouble codes, monitor vehicle performance or read from your various vehicle control modules. Edit > Optimize vehicle performance, fuel economy, and more. Write > License and tune any vehicle currently supported by HP Tuners. Drive >>>>>
Note: The MPVI2+ does not include any pre-loaded tunes or calibrations.
NEW FEATURES.
BLUETOOTH LOW ENERGY 5.0
iOS capability with TDN App
M8 CONNECTOR (4-pin)
Motorsports grade, screw-on
12x FASTER USB-C
Improved connection speed
(4 MB/s vs 330 KB/s)
RGB LED
Bluetooth Pairing & Device Status
HARDWARE & SOFTWARE
Combine the MPVI2+ With VCM Suite for the most comprehensive scanning, logging and calibration tools on the market. Whether you are building a dedicated track car, a next level streetcar, or just want more fuel efficiency or better towing for your daily driver, HP Tuners has the tools to get the most out of your vehicle.
Adjust a multitude of parameters such as spark, fuel, RPM limits, fan temps and speeds, transmission shift points and pressures, exhaust valve control, speedometer settings and many more. Then, write these changes back to the vehicle’s various control modules
The most feature rich scan tool on the market. View, chart, and log diagnostic data in real time through the vehicle’s OBDII port. View vehicle Diagnostic Trouble Codes (DTC’s), configure fans, closed loop, gear select, timing, air fuel ratio and more in real time
WELCOME TO PRO.
The next advanced step for your MPVI2+. Together with Pro Feature Set, the Pro Link+ allows you to import up to two analog signals and one CAN signal at a time. Seamlessly integrate your Wideband O2, boost pressure sensor, and more, enhancing your calibration and logging experience. Standalone Data Logging is also new to Pro Feature Set, making it easier than ever to collect data while driving.
CONFIGURATION
3REVIEW
In stock
What is the MPVI2+?
Connect > It is an OBDII interface tool that connects VCM Suite to your vehicle’s various control modules. Read > Diagnose and clear trouble codes, monitor vehicle performance or read from your various vehicle control modules. Edit > Optimize vehicle performance, fuel economy, and more. Write > License and tune any vehicle currently supported by HP Tuners. Drive >>>>>
Note: The MPVI2+ does not include any pre-loaded tunes or calibrations.
NEW FEATURES.
BLUETOOTH LOW ENERGY 5.0
iOS capability with TDN App
M8 CONNECTOR (4-pin)
Motorsports grade, screw-on
12x FASTER USB-C
Improved connection speed
(4 MB/s vs 330 KB/s)
RGB LED
Bluetooth Pairing & Device Status
HARDWARE & SOFTWARE
Combine the MPVI2+ With VCM Suite for the most comprehensive scanning, logging and calibration tools on the market. Whether you are building a dedicated track car, a next level streetcar, or just want more fuel efficiency or better towing for your daily driver, HP Tuners has the tools to get the most out of your vehicle.
Adjust a multitude of parameters such as spark, fuel, RPM limits, fan temps and speeds, transmission shift points and pressures, exhaust valve control, speedometer settings and many more. Then, write these changes back to the vehicle’s various control modules
The most feature rich scan tool on the market. View, chart, and log diagnostic data in real time through the vehicle’s OBDII port. View vehicle Diagnostic Trouble Codes (DTC’s), configure fans, closed loop, gear select, timing, air fuel ratio and more in real time
WELCOME TO PRO.
The next advanced step for your MPVI2+. Together with Pro Feature Set, the Pro Link+ allows you to import up to two analog signals and one CAN signal at a time. Seamlessly integrate your Wideband O2, boost pressure sensor, and more, enhancing your calibration and logging experience. Standalone Data Logging is also new to Pro Feature Set, making it easier than ever to collect data while driving.
CONFIGURATION
3REVIEW
You must be logged in to post a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Phoneix Elite
CONNECT TO THE NEWEST VEHICLES
Vehicle communication is enhanced with most of the latest communication protocols. The Phoenix Elite comes equipped with wireless VCI and CAN-FD capabilities.
ALL DATA ON ONE SCREEN
-Topology mapping displays related vehicle systems and CAN network.
-Diagnose communication issues instantly.
-Color-coded mapping of each module’s communication status.
-Offer active tests, special functions, coding, initialization, and memory resets.
GUIDED FUNCTIONS FOR VAG VEHICLES
Step-by-step guided diagnostics procedures based on code for VW and Audi Vehicles.
VEHICLE AUTO VIN AND AUTODETECT
The Phoenix Elite automatically captures the vehicle’s VIN number and finds all relevant information about the vehicle. Use this feature to save time and prevent mistakes.
PRE-SCAN AND POST-SCAN REPORTING
The Pre-Scan and Post-Scan features allow the technician the ability to record the codes prior to repair. This will enable copies to be given to insurance companies and customers for repair approval. When the repairs are completed, the Post-Scan report can be recorded showing all codes are clear, showing off the vehicle's clean bill of health.
EXPAND YOUR CAPABILITIES WITH ADAS CALIBRATION
Stepping beyond diagnostics, the Phoenix Elite introduces ADAS capabilities to auto shops. Download the ADAS upgrades and pair with a Phoenix ADAS system to turn your Phoenix Elite into a calibration station, creating a new revenue stream for auto shops.
OBD Master millage correction
Hardware Advantages
1. Built-in VCI box
2. 5-inch touchscreen
3. Charge directly via OBD interface
4. Practical and high-end gift box
5. Industrial design with silicone case
Add “Help” Functions
1. including built-in testable vehicle models, upgrade announcement, features, help notes and wiring diagrams, etc
2. Carlist and upgrade announcement, all details are available on the device
3. Customers can look up the features or uniquely support functions on the device
4. Help notes: built-in help notes for each model or function
airbag reset P50
dd HYUNDAI/KIA airbag reset(supports CANFD protocol working with CANFD adapter), including but not limited to below models:
95910-CW000(R7F7015803)
95910-CW100(R7F7015803)
95910-CZ000(R7F7015803)
95910-N7010(R7F7015803)
95910-N7030(R7F7015803)
95910-N7050(R7F7015803)
95910-N7070(R7F7015803)
95910-N9010(R7F7015803)
95910-N9050(R7F7015803)
95910-N9060(R7F7015803)
95910-N9080(R7F7015803)
95910-N9110(R7F7015803)
95910-P0000(R7F7015803)
95910-P0010(R7F7015803)
95910-P0100(R7F7015803)
95910-P0110(R7F7015803)
95910-R2320(R7F7015803)
P004 adapter is designed for ECU programming, reading or writing data in bench mode. It has merits below:
1. Programming devices keep in normal communication no matter turn on or off 12V power button;
2. Turn on or off 120Ω resistance at any time for CANBUS ECU;
3. Support 6&14 and 3&11 CANBUS communication at the same time;
4. Support GM Single CAN(GM SCAN);
5. Support K communication;
6. P004 jumper can connect with multiple wires at the same time, make wiring clearer and easier;
7. DB15 connector can communicate with any OBDII-16 I/O interface.
Functions
1. supports one-click airbag reset for 47 brands and 5800+ ECU part No.
2. supports fuzzy search for ECU part No.
3. contains clear BENCH mode wiring diagram
4. contains powerful and complete description files for fault code
More functions in developing...
Advanced Functions
-
Ecu Info.
-
Read DTC
-
Erase DTC
-
Read EEPROM
-
Write EEPROM
-
Read FLASH
-
Write FLASH
-
Erase Crash
-
Write VIN
...
Coverage
1. Supported Brands(49 Brands)
-
AUDI/VW/SKODA/SEAT
-
BENZ
-
BMW/MINI
-
CHRYSLER/DODGE/JEEP
-
FIAT
-
FORD/LINCOLN
-
GM(BUICK/CADILLAC/CHEVROLET/GMC)
-
GREATWALL
-
HONDA/ACURA
-
HYUNDAI/KIA
-
LAMBORGINI
-
LAND ROVER/JAGUAR
-
MASERATI
-
MAZDA
-
MITSUBISHI
-
NISSAN/INFINITI
-
OPEL
-
PORSCHE
-
PSA(PEUGEOT/CITROEN)
-
RENAULT/DACIA/SMART
-
SUBARU
-
SUZUKI
-
TESLA
-
TOYOTA
-
VOLVO
2. Over 6500 ECU part No.(supporting fuzzy search)
3. MCU types
-
H8SX
-
RH850
-
SPC
-
XC2XXX
-
TC2XXX
-
TMS570
VCX SE with out software
Dual mode intelligent remote diagnosis
- Super remote diagnosis only needs equipment networking to realize on-line diagnosis of the original factory.
- Compatible with remote diagnosis, it can support remote diagnosis of various special function equipment.
- The equipment can quickly access to the remote diagnosis platform with one key.
-
One device supports many original vehicle diagnostic softwares
- The hardware is updated synchronously with the VCI of the major original factories, and it fully supports the new models and new original software based on doip Ethernet diagnosis.
- Realize the original factory level diagnosis function of the world’s major brands, one equipment can replace many expensive OEM equipments.
- All kinds of advanced diagnosis and programming functions are completely consistent with the original factories, and the performance even exceeds the original factories.
- One click installation, original support driver and online upgrade, easy to use.
-
Highly integrated vehicle diagnostic interface
- High performance dual core processor: a doip network processor and a vehicle bus processor.
- Support 4-way can bus, 2-way K-line / L-line, realize multi protocol high-speed concurrent communication.
- Innovative OBD-II multi-channel communication hardware supports intelligent switching between traditional bus and doip network.
- It supports mapping vehicle doip Ethernet to WLAN to realize wireless Ethernet diagnosis.
- Host communication interface supports USB / RJ45 / WLAN and other interfaces, which is flexible and easy to use.
- Portable design with integrated OBD-II interface, plug and play.
- The usb-type-c interface with reinforcement design can be plugged in and out stably.
-
Meet the automotive industry standard design
- SAE-J2534-1/2 Pass-Thru with EURO 5
- ISO-22900 MVCI & D-PDU
- ISO-13400 DoIP
-
Brand
Model
Original diagnosis software
Support
BENZBenZ, Maybach, Smart, FUSOXENTRY Diagnosis & DAS & DTS
BMWBMW, Rolls Royce, MINIISTA-D/P & E-Sys & INPA
VWVolkswagen, SIAT, Skoda, Bentley, LamborghiniODIS & ODIS-Engineer
AUDIAudi
ODIS & ODIS-Engineer
JLRJaguar, Land RoverJLR Pathfinder
JLRJaguar, Land RoverJLR SDD
VOLVOVolvo
Volvo VIDA
GMChevrolet, Buick, Cadillac, Opel, HortonGM GDS2 & Tech2Win & RDS
FORDFord
FORD IDS
MAZDAMazda
MAZDA IDS
TOYOTAToyota, Lexus, SAINTOYOTA Techstream TIS
HONDAHonda, AcuraHONDA Diagnostic System HDS
SUBARUSubaru
Select Monitor SSM3/SSM4
PROLINK for MPVI2/ 3
og vehicle data with your MPVI2 interface from an external sensor, like a wideband or boost pressure sensor, using the PROLINK cable.
https://www.hptuners.com/pub/Pro_Link_v1.pdf
OpenPort 2.0 Rev E OBD-II Diagnostic Interface
OpenPort 2.0 Rev E OBD-II Diagnostic Interface
The OpenPort 2.0 Rev E is a high-performance OBD-II diagnostic interface designed for professional and enthusiast vehicle tuning, data logging, and ECU flashing. Compatible with a wide range of vehicles, it provides reliable communication between your car's ECU and a computer for tuning and diagnostics.
Key Features:
✅ High-Speed USB Interface – Ensures fast and stable data transfer.
✅ OBD-II Compatibility – Works with most modern vehicles supporting OBD-II protocols.
✅ ECU Flashing & Tuning – Ideal for custom tuning, performance modifications, and remapping.
✅ Data Logging Support – Monitor and analyze real-time engine parameters.
✅ Firmware Upgradeable – Keeps your device updated with the latest improvements.
Package Includes:
✔ OpenPort 2.0 Rev E Interface – Transparent case for enhanced durability.
✔ USB to Mini-USB Cable – For seamless PC connection.
✔ Software DVD – Includes necessary drivers and tuning software.
Applications:
🔹 ECU reprogramming and remapping
🔹 DTC code reading and clearing
🔹 Performance tuning and monitoring
🔹 Data logging for advanced diagnostics
Perfect for car tuning professionals, performance enthusiasts, and automotive engineers, the OpenPort 2.0 Rev E is a must-have tool for unlocking your vehicle's full potential.
Reviews
There are no reviews yet.