injector cleaner MIC3-6

LAUNCH PFP-100 Programming Flash Power is a must tool for vehicle diagnosis. It can prevent failure and abnormal during the process of programming due to low voltage.

Features:

1. 5 Protection Modes: Reverse Protection, Short Circuit Protection, Low Voltage Protection, Overheat Protection, Overcharge Protection, Synchronous Rectification (220V only)

2. Charging Mode: The regular mode for battery that under normal condition

3. Exhibit Mode: Charging the battery continually in small current in showroom

4. Programming Mode: The programming voltage of 12-16V can be directly selected

5. Hidden Repair Mode: Auto repair if there is a minor issue of batter

pecification:

Description

Who it’s For:

• Automotive, marine, and heavy duty technicians who troubleshoot vehicle electronics and electrical systems
• Aftermarket installers looking to test or troubleshoot new equipment
• Technicians looking to test starter motors or large electrical loads like refrigeration units should look at our CM600.

What it Does:

Quickly and easily measures circuit current consumption, as well as voltages and resistances.

How it Works:

1. Turn the unit on by turning the selector wheel to the mode of interest
2. Position the CM100 near and parallel to the wire or cable, with the jaw closed
3. Press the zero/tare button to compensate for interference
4. Open the jaw, put it around the wire, and allow it to close
5. Read the circuit’s AC or DC current consumption off the high-contrast liquid crystal display

Warranty & Support:

Covered by our standard 1-year warranty, and supported for much longer. Replacement parts and accessories are generally available for 10+ years.

Applications

• Electronic and electrical circuits
• Automobiles
• Trucks
• Trailers
• Boats
• RVs
• All 0 to 100 Volt AC/DC powered circuits

Features

The CM100 low current clamp meter is designed to accurately measure current, current leaks (parasitic draws down to 1mA) and electrical loads from 1mA to 100 amp AC/DC and voltages from 0 to 600 AC/DC. The CM100 can be used on electric motors, fuel pumps, charging systems, electrical circuits, etc.

The small diameter (½ inch or 13mm) and narrow jaw makes it ideal for use in confined spaces and on small gauge wires. Other features include up to 600 volt AC/DC voltage, resistance measurement functions, audible continuity test, display hold and peak detector.

• ACCURATE MEASUREMENT: Measures electrical loads from 1mA to 100 amp AC/DC and voltages from 0 to 600 AC/DC.
• EASY TO READ AND USE: Large 4 digit LCD display, one touch auto-zero, and audio feedback.
• MULTI-PURPOSE: Check and troubleshoot grounds, voltage drops, currents in battery chargers, alternators, electrical loads, and more.
• DURABLE: Rugged plastic enclosure, 50 hours battery life, with a carrying case for safe storage.
• COMFORTABLE: Quality design offers comfortable handling, and a smaller jaw for ease of use.