FF310 FaultFinder™
ر.ع.85.00
Open and Short Circuit Finder and Tracer
Tracing circuits is time consuming and thankless work. The FF310 FaultFinder helps you track down that open, short, or unidentified wire quickly and easily. With the FF310, you can get those circuits fixed, and the job done!
We’ve been making electronic troubleshooting tools for over 30 years, and this is our best one. The FF310 can track wires through interior panels, and anything else other than solid sheet metal, so you can find your problem quickly. Disassembling interior panels or bodywork and taking apart harnesses to manually inspect wires will always take more time and patience than you’ve got. The FF310 will get you to the fault straight away, so you know you’re not wasting time
Description
Who it’s For:
- Heavy-duty mechanics
- Commercial truck maintainers
- Marine electricians
- Automobile restorers
What it Does:
Help you track and trace wiring to find hidden wires and circuit faults (such as corroded or worn-out cables).
How it Works:
- Connect the FF310T (transmitter) in series with the circuit to be traced. Use (included) fuse socket connectors if necessary.
- Turn on both the FF310T and the FF310R (receiver).
- Use the receiver to trace the wire, the audible beeps and visible flashes should indicate your proximity to the wire. It is usually best to start near the transmitter.
- (Optional) manually adjust receiver sensitivity if you have any issue with tracing.
Warranty & Support:
Covered by our standard 1-year warranty, and supported for much longer. Replacement parts and accessories are generally available for 10+ years.
Features
The FF310 FaultFinder is a specially designed tool for tracking and tracing short and open circuits, broken wires and current leaks on any electrical circuit with voltages from 6 to 42 Volt DC, and is used by technicians worldwide in an ample range of equipment such as automobiles, truck trailers, tractors, farming equipment, boats, forklifts, motorcycles, all-terrain and recreational vehicles, etc.
The 42V ready™ FF310’s wide working voltage range, automatic short/open detection, adjustable sensitivity levels and flexible antenna probe enables the technician to troubleshoot a complete array of common electrical problems without having to untie wire harnesses or remove body panels.
The FF310 Faultfinder is capable of:
- Short circuit tracing
- Open circuit tracing
- Wire identification
- Wire/Circuit tracing
- Ground connections checks
Specifications
- Input Voltage: 6 to 42 volts DC.
- Input DC Current: unlimited (internally limited)
- Voltage Output: 5 volts DC maximum
- Current Output: 100 mA DC RMS maximum
- FF310T (Transmitter) Internal Battery: 1604A (9V), included with kit
- FF310R (Receiver) Internal Battery: 1604A (9V), included with kit
Out of stock
Open and Short Circuit Finder and Tracer
Tracing circuits is time consuming and thankless work. The FF310 FaultFinder helps you track down that open, short, or unidentified wire quickly and easily. With the FF310, you can get those circuits fixed, and the job done!
We’ve been making electronic troubleshooting tools for over 30 years, and this is our best one. The FF310 can track wires through interior panels, and anything else other than solid sheet metal, so you can find your problem quickly. Disassembling interior panels or bodywork and taking apart harnesses to manually inspect wires will always take more time and patience than you’ve got. The FF310 will get you to the fault straight away, so you know you’re not wasting time
Description
Who it’s For:
- Heavy-duty mechanics
- Commercial truck maintainers
- Marine electricians
- Automobile restorers
What it Does:
Help you track and trace wiring to find hidden wires and circuit faults (such as corroded or worn-out cables).
How it Works:
- Connect the FF310T (transmitter) in series with the circuit to be traced. Use (included) fuse socket connectors if necessary.
- Turn on both the FF310T and the FF310R (receiver).
- Use the receiver to trace the wire, the audible beeps and visible flashes should indicate your proximity to the wire. It is usually best to start near the transmitter.
- (Optional) manually adjust receiver sensitivity if you have any issue with tracing.
Warranty & Support:
Covered by our standard 1-year warranty, and supported for much longer. Replacement parts and accessories are generally available for 10+ years.
Features
The FF310 FaultFinder is a specially designed tool for tracking and tracing short and open circuits, broken wires and current leaks on any electrical circuit with voltages from 6 to 42 Volt DC, and is used by technicians worldwide in an ample range of equipment such as automobiles, truck trailers, tractors, farming equipment, boats, forklifts, motorcycles, all-terrain and recreational vehicles, etc.
The 42V ready™ FF310’s wide working voltage range, automatic short/open detection, adjustable sensitivity levels and flexible antenna probe enables the technician to troubleshoot a complete array of common electrical problems without having to untie wire harnesses or remove body panels.
The FF310 Faultfinder is capable of:
- Short circuit tracing
- Open circuit tracing
- Wire identification
- Wire/Circuit tracing
- Ground connections checks
Specifications
- Input Voltage: 6 to 42 volts DC.
- Input DC Current: unlimited (internally limited)
- Voltage Output: 5 volts DC maximum
- Current Output: 100 mA DC RMS maximum
- FF310T (Transmitter) Internal Battery: 1604A (9V), included with kit
- FF310R (Receiver) Internal Battery: 1604A (9V), included with kit
You must be logged in to post a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
CM100 AC/DC Current Clamp Meter
Description
Who it’s For:
- Automotive, marine, and heavy duty technicians who troubleshoot vehicle electronics and electrical systems
- Aftermarket installers looking to test or troubleshoot new equipment
- Technicians looking to test starter motors or large electrical loads like refrigeration units should look at our CM600.
What it Does:
Quickly and easily measures circuit current consumption, as well as voltages and resistances.
How it Works:
- Turn the unit on by turning the selector wheel to the mode of interest
- Position the CM100 near and parallel to the wire or cable, with the jaw closed
- Press the zero/tare button to compensate for interference
- Open the jaw, put it around the wire, and allow it to close
- Read the circuit’s AC or DC current consumption off the high-contrast liquid crystal display
Warranty & Support:
Covered by our standard 1-year warranty, and supported for much longer. Replacement parts and accessories are generally available for 10+ years.
Applications
- Electronic and electrical circuits
- Automobiles
- Trucks
- Trailers
- Boats
- RVs
- All 0 to 100 Volt AC/DC powered circuits
Features
The CM100 low current clamp meter is designed to accurately measure current, current leaks (parasitic draws down to 1mA) and electrical loads from 1mA to 100 amp AC/DC and voltages from 0 to 600 AC/DC. The CM100 can be used on electric motors, fuel pumps, charging systems, electrical circuits, etc.
The small diameter (½ inch or 13mm) and narrow jaw makes it ideal for use in confined spaces and on small gauge wires. Other features include up to 600 volt AC/DC voltage, resistance measurement functions, audible continuity test, display hold and peak detector.
- ACCURATE MEASUREMENT: Measures electrical loads from 1mA to 100 amp AC/DC and voltages from 0 to 600 AC/DC.
- EASY TO READ AND USE: Large 4 digit LCD display, one touch auto-zero, and audio feedback.
- MULTI-PURPOSE: Check and troubleshoot grounds, voltage drops, currents in battery chargers, alternators, electrical loads, and more.
- DURABLE: Rugged plastic enclosure, 50 hours battery life, with a carrying case for safe storage.
- COMFORTABLE: Quality design offers comfortable handling, and a smaller jaw for ease of use.
TA110 Laser Tachometer and Counter
Description
The TA110 Laser Tachometer and counter can be used to measure and test the number of rotations per minute (RPM) or total number of rotations or events on any spinning shaft, pulley, wheel, drive belt, fan, or other rotating objects in general, safely, accurately and easily due to its unique ergonomic design. Numerous application uses can be found in industrial, automotive, heavy duty, HVAC, agricultural and aviation maintenance sectors.
Wide measuring range: 60 to 99,999 RPM or count, 2″ to 20″ reading distance, Min/max memory recall, backlit display, <0.3 sec response time, count function and auto power off.
Applications
- Internal combustion engines
- Electric motors
- Rotating machinery
Features
- State of the Art patented ergonomic design
- Measures from 60 to 99999 RPM
- 0.05 % accuracy
- 2 to 20″ (50 to 500 mm) measuring range
- Quick selection between RPM and Count functions
- Maximum and minimum memory recall functions
- Continuous reading and data hold modes
- Quick response: <0.3 seconds
- Large LCD display with symbols and backlight
- On target display indicator
- RPM, Total revolutions, maximum, minimum and last reading memory
- Laser powered optical system is easy to use under all light conditions
- Only setup required is a reflective mark on the rotating part
Specifications
- Display:
- 5 x 0.7″ (16mm)digits display
- Backlight
- On target indicator
- RPM indicator
- Low battery indicator
- Accuracy: ±(0.05%+1 Digit)
- Operating Temperature: 32°F to 122°F (0°C to 50°C)
- Response time: >0.3 sec.(over 120 RPM)
- Range Selection: Auto Ranging
- Memory: Max. value, Min. value and display hold stored automatically in memory
- Distance to target: 2″ to 20″ (50 mm to 500 mm)
- Laser Pointer: Laser Diode, < 1mW output wavelength 630-670 nm, Class II
- Power Source: 9-volt alkaline battery type NEDA 1604
- Battery life: Approx. 5 hours.(w/alkaline batteries)
- Dimensions: 3.13″x 1.88″x 7.0″ (80 x 48 x 178 mm)
- Weight: 7.6 oz. (215 g) including battery
How-To
- Attach a small piece of reflective tape to the shaft or rotating part, aim the laser beam to the reflective mark and read the RPM or revolutions count on the large display.
- Maximum, minimum and last reading are automatically saved into the internal memory of the instrument, and can be recalled at any time
- Bright and powerful laser optical system allows for easy targeting of rotating shaft, wheel, etc., even in bright daylight.
- Measurement can be obtained from safe and comfortable distances from 2″ to 200″
The large 5 digits digital display allows measurements of up to 99,999 RPM without need to switch scales or multiply readings.
3
PowerScan PS100
• Performs every type of service including power injection, measurement, ground testing, polarity checks, continuity testing and components activation
• Easy to read AVOmeter allows you to read voltage, current and resistance at the fingertip
• With a flip of the power switch, you have an instant hot/ground lead for powering up electrical components like cooling fans, relays, etc.
• Simultaneously uses the hot lead and the ground lead to activate components right in your hand
• Instantly identifies positive, negative and open circuits
• Tests for bad ground contacts instantly, allowing you to follow and locate shorts fast without wasting fuses
• Instantly checks continuity of switches, relays and diodes
• Circuit breaker protected
• Built-in Flashlight enables you to work in the dark
• Audio tone indicator allows for no-look menu scrolling once users are familiar with menu tone assignment
• 20ft (extendable) cable provides excellent accessibility to test along the vehicle
• Extremely easy to use and highly reliable
Reviews
There are no reviews yet.