chassis measurement 3D Finland جهاز قياس الشاصي معتمد
ر.ع.3,990.00
Electronic tram
gauge for vehicle
measuring
EzCalipre3D is an advanced measuring
device for exact verification of vehicle
chassis and body condition and for damage
documentation, developed by Autorobot
Finland Oy. EzCalipre3D is easily portable
and movable, it can be used for 2D or 3D
measuring in all kinds of surroundings, and
therefore it opens up whole new scopes for
vehicle estimation.
Electronic tram
gauge for vehicle
measuring
Page
Applicable everywhere
System calibration and electronic measuring can
be done on the body shop yard or on a post lift
when estimating the vehicle’s repair cost, or during
straightening work when the car is mounted in a frame
bench of any kind, or when the car has been brought in
an inspector’s office to be certified for roadworthiness
for example.
Modern data transfer
Data on vehicle’s present condition, which is provided
by EzCalipre’s length sensor and inclinometer for
height, gets transmitted in the PC measuring software
with wireless WLAN connection (Wireless Local Area
Network). Immediate, direct data transfer totally
eliminates mistakes with typing etc. Measuring results
can be viewed immediately both on EzCalipre3D
display and on PC screen.
Damage analysis
Measuring with EzCalipre3D makes vehicle
straightening work quicker and ensures the quality
of your work. EzCalipre’s technique is supported by
Autorobot’s own, very comprehensive vehicle data
files (approximately 60 reference points per vehicle).
EzCalipre3D provides a quick report on side damage,
showing by how many millimeters the B pillar has bent
in (the first picture) for example, and if the crash has
shortened the middle section of the body (the second
picture). This information helps to produce a realistic
cost estimate and repair schedule. In these pictures the
measured values are saved in a portable computer.
Areas of use
EzCalipre3D is suitable for measuring passenger
vehicles, cross country vehicles and vans, and its’ most
essential purpose is to serve body shop diagnostics and
structural vehicle repair. Wireless and easily portable
with the carry case, it is easy to move around. Just like
your laptop, EzCalipre3D with Li-Ion battery makes it a
mobile solution which adapts to the moving work of
insurance company inspectors, for example.
Patented.
Wireless data transfer
EzCalipre3D central processing unit (CPU) reads the
exact locations of the vehicle points with the help of
in-built sensors for length and vertical inclination.
Measuring points can be selected in the display of the
CPU, and saved in the computer database. Chassis and/
or body points that were saved during the measuring
session can be printed out on separate Before Repair
or After Repair reports, or both. Autorobot EzCalipre3D
tram gauge uses wireless WLAN technique and
therefore it can be used with nearly all kinds of
computers.
Only 1 left in stock
Electronic tram
gauge for vehicle
measuring
EzCalipre3D is an advanced measuring
device for exact verification of vehicle
chassis and body condition and for damage
documentation, developed by Autorobot
Finland Oy. EzCalipre3D is easily portable
and movable, it can be used for 2D or 3D
measuring in all kinds of surroundings, and
therefore it opens up whole new scopes for
vehicle estimation.
Electronic tram
gauge for vehicle
measuring
Page
Applicable everywhere
System calibration and electronic measuring can
be done on the body shop yard or on a post lift
when estimating the vehicle’s repair cost, or during
straightening work when the car is mounted in a frame
bench of any kind, or when the car has been brought in
an inspector’s office to be certified for roadworthiness
for example.
Modern data transfer
Data on vehicle’s present condition, which is provided
by EzCalipre’s length sensor and inclinometer for
height, gets transmitted in the PC measuring software
with wireless WLAN connection (Wireless Local Area
Network). Immediate, direct data transfer totally
eliminates mistakes with typing etc. Measuring results
can be viewed immediately both on EzCalipre3D
display and on PC screen.
Damage analysis
Measuring with EzCalipre3D makes vehicle
straightening work quicker and ensures the quality
of your work. EzCalipre’s technique is supported by
Autorobot’s own, very comprehensive vehicle data
files (approximately 60 reference points per vehicle).
EzCalipre3D provides a quick report on side damage,
showing by how many millimeters the B pillar has bent
in (the first picture) for example, and if the crash has
shortened the middle section of the body (the second
picture). This information helps to produce a realistic
cost estimate and repair schedule. In these pictures the
measured values are saved in a portable computer.
Areas of use
EzCalipre3D is suitable for measuring passenger
vehicles, cross country vehicles and vans, and its’ most
essential purpose is to serve body shop diagnostics and
structural vehicle repair. Wireless and easily portable
with the carry case, it is easy to move around. Just like
your laptop, EzCalipre3D with Li-Ion battery makes it a
mobile solution which adapts to the moving work of
insurance company inspectors, for example.
Patented.
Wireless data transfer
EzCalipre3D central processing unit (CPU) reads the
exact locations of the vehicle points with the help of
in-built sensors for length and vertical inclination.
Measuring points can be selected in the display of the
CPU, and saved in the computer database. Chassis and/
or body points that were saved during the measuring
session can be printed out on separate Before Repair
or After Repair reports, or both. Autorobot EzCalipre3D
tram gauge uses wireless WLAN technique and
therefore it can be used with nearly all kinds of
computers.
You must be logged in to post a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Valve seat and guide cutting machine TS60
VALVE SEAT AND VALVE GUIDE CUTTING MACHINE
TS 60 IS HIGH PRECISION MACHINE FEATURING THE LATEST TECHNOLOGY INCORPORATING AIR-FLOAT AUTOMATIC CENTERING AND MOTORSPINDLE. AIR-FLOATED TABLE FIXTURE CAN MAKE THE MOVEMENT OF WORKPIECES MORE FLEXIBLE.
ESPECIALLY DEVELOPED FOR THE REPAIR OF SMALL MOTORCYCLE AND AUTOMOTIVE MULTIVALVE CYLINDER HEADS.
| Model | TS60 | |
| Machine capabilties | Max. Length of the cylinder head | 600mm/23.62inch |
| Max. Width of the cylinder head | 400mm/15.75inch | |
| Max. Height of the cylinder head | 450mm/15.72inch | |
| Corsswise workpiece tilting | +42~-15degress | |
| Machine Capacity dia. (min-max) | 16 – 60mm / 0.63 – 2.36inch | |
| Work head displacement | 8mm/0.32inch | |
| Travel of working table | Lengthwise | 400mm/15.75inch |
| Crosswise | 8mm/3.15inch | |
| Spindle | Max. spindle inclination | 5degress |
| Spindle Travel | 200mm/8inch | |
| Power of the spindle | 1.5KW | |
| Spindle rotation speed | 0 – 1000RPM | |
| Alimentations | Power supply | 380V – AC – 3PH – 50HZ |
| 220V – AC – 3PH – 60HZ | ||
| Air Supply max | 6Bar/87psi | |
| Max. Air flow | 300 per min/ 11CFM | |
| Level of noise at 400RPM | 72dba | |
| Level of noise at 1200RPM | 82dba | |
| Net Weight approx | 600kg/ 1320lbs | |
| Machine space requirements | Length | 1400mm/55.12inch |
| Width | 900mm/35.43inch | |
| Height | 2000mm/78.74inch | |
paint booth Electric 3 Motor Normal doors
name Quantity/unit
Specification introduce
External dimensions mm 7000×5100×3200mm **
Internal dimensions mm 6900×3900×2450mm Subject to internal dimensions
door size 3 fans 3000*2400mm Three-folding sheet metal door, with glass
observation window, aluminum alloy latch
side door size 1 650*1800mm With explosion-proof pressure lock, door
handle, aluminum alloy edge
wall panel 1 set Thickness 50mm 50mm EPS board, density 8kg/m³, single-layer
thickness of outsourcing steel plate 0.326mm,
950mm wide. color: White
Hydrostatic layer
top bracket
1 set For total size 3.9m*6.9m 40*60 electro-galvanized square tube
Static pressure layer
filter cotton support
4 2860*1575*25mm spray, white
bottom bracket 1 40*40mm angle iron plus convex
steel
40*40mm angle iron plus convex steel, the
height is 280mm
Bottom plate
(painted)
Steel grating 2 lanes 30*4mm, 3
lanes 30*3mm steel grating
There are 5 grid plates, 2 channels are 53cm
wide and 3 channels are 90cm wide.
Blower (energy-
saving type)
1 set 1.5KW (380V/50Hz, three-phase) Top-mounted high-efficiency energy-saving
fan
induced draft fan 1 set 5.5KW (380V/50Hz, three-phase) Double inlet centrifugal fan
Deluxe Infrared
Roast Lamp
8 groups 3 per group, 24 in total There are 3 heating tubes in each light box,
each 1KW, and the heating tubes are
protected by a mesh to avoid burns by
operators
box 1 set Exhaust box Galvanized sheet bending package, 40*40
square tube frame
dome light 8 groups Each group of 3 lamps, each
lamp is 16W (T5 integrated LED
lamp)
Inclined ceiling light with transparent glass
cover (easy to dismantle);
Electric control box 1 380V/50Hz, three-phase power Delixi's main electrical appliances, with
leakage protection, temperature setting,
painting, baking paint, lighting, power switch,
emergency stop, etc.
filter sponge 1 set Three-dimensional spray top
cotton, initial effect tuyere
cotton
board 1 set 1500mm*530mm Two train boarding boards
Multifunctional IGBT Inverter Aluminum Dent Pulling Machine FY-65L
With advanced welding power and control technology, FY-65L are specifically designed for aluminium panel repairs of BMW, Mercedes-Benz, Audi and Volvo amongst others. Whilst specially designed for aluminium body repair works, it is also suitable for use on other metals such as steel, copper and iron.
- With leading international inverter technology. Microprocessor control system optimizes the welding parameters. Due to the adoption of advanced digital control technology and user friendly design, all you have to do is select the welding current corresponding to the workpiece thickness to achieve the best weld quality.
- High precision power control system.
- Complete with two and four-kickstand crossbar lifters to accommodate any repair task for the whole aluminium car body.
- Suitable for dent pulling of aluminium and different kinds of car steels.
- High welding strength without damage to the metallic coatings and paint surfaces on the back.
- Digital display, simple to operate and easy to use.
- Able to weld 3mm-8mm aluminium stud bolts, steel stud bolts and aluminium washers.
- Additional aluminium MIG welder is available as an option
UV Inspection Light for Car Paint Defects
مصباح فحص UV بقدرة 21V يكشف المعجون وأماكن الإصلاح تحت الطلاء عبر إظهار اختلاف الامتصاص والانعكاس، كما يبرز حواف الدمج وآثار الصنفرة والرشّ الزائد لسهلة تحديد أماكن التعديل قبل التلميع أو الخبز.
in absorption and reflectance. It also makes blend edges, sanding marks, and overspray stand out—so you can mark and fix them before polishing or baking.
Reviews
There are no reviews yet.