3T ECONOMY FLOOR JACK

Product Summary

• Capacity: 3 tonnes (approx. 6,000 lbs) — designed for light trucks, SUVs, and heavier cars.

• Model: TZ830029 (Economy series) — emphasises affordability while offering core functionality.

• Type: Hydraulic floor/trolley jack — intended for lifting the vehicle by its jack points and enabling maintenance/inspection.

• Construction: Heavy steel frame, low-profile design (in economy version) for easier access under many vehicles.

🧰 Key Specifications & Features

While I could not locate a fully verified spec sheet for TZ830029 specifically, based on similar models in the same series (e.g., TZ830009) and common economy-3T jacks, we can expect features like:

• Minimum lift height: Approx. ~85 mm or slightly higher (depending on variant). (For TZ830009, min ~85 mm) Tongrun Jacks

• Maximum lift height: Up to ~600 mm (for the 3 T variant in that series) Tongrun Jacks

• Built-in bypass/overload valve for safety, preventing lifting beyond design capacity. Tongrun Jacks

• Steel casters/wheels for mobility in a workshop environment.

• Economy finish: simpler than premium models, fewer extra features, but “good enough” for many standard applications.

ℹ️ Pros & Use-Case Suitability

• Good value for money: If your lifting needs are moderate (vehicles up to ~3 tonnes) this model gives you the basic capability.

• Workshop and garage friendly: For general maintenance work (tyre changes, underside inspections, brake servicing) it will be suitable.

• Suitable for heavier cars: The 3T capacity gives headroom beyond many standard passenger cars, giving flexibility.

• Space efficient: As an economy model, likely lower cost and simpler design which is beneficial if budget or space is constrained.

⚠️ Considerations & Limitations

• Minimum height matters: If you have very low-profile cars (sports/modified vehicles) the lift minimum may be too high. You’d need to check the exact min height for TZ830029. If min height is ~85 mm or more, some low cars may struggle.

• Max height: Economy models may not lift as high as premium jacks; if you need huge clearance beneath the vehicle (e.g., for frame work) it may be limiting.

• Durability & extra features: Economy model means fewer bells & whistles — e.g., might have thinner steel, less refined finish, fewer service features. Check build quality.

• Safety & support equipment: Always remember: after lifting, support the vehicle with jack-stands before working underneath. Do not rely solely on the jack.

• Floor condition: The jack will perform best on a smooth, level, solid floor (concrete). On soft or uneven surfaces it may be unsafe.

• Spare parts/service: Since the model is economy and from a specific brand/series, check availability of replacement parts (hydraulic seals, casters) locally in Oman/Muscat.

🔍 Recommendation Summary

If I were advising you (البشير), I’d say:

• If you have a workshop or private garage and occasionally service cars up to ~3 tonnes, this floor jack is a solid choice for general work.

• If you intend to service low-clearance sports cars, or you need very high lift or frequent heavy industrial lifting, you might want to compare with a “low profile” premium 3 T jack (with min height <70 mm) or a 4–5 T model.

• Before purchase, check the exact minimum height, the maximum height, and confirm the load rating is certified to your local/regional standard (safety certifications).

• Also inspect sample units (if possible) for build quality (welds, finish, caster smoothness, handle operation) and ask about warranty/service.