MaxiCheck MX808 s
ر.ع.205.00
OBD2 All System Diagnostic Scanner
When it comes to ultra-portability, MaxiCheck MX808 is your perfect companion. Installed with a fast quad-core processor, MX808 offers maximum convenience and swift diagnosis. The intuitive user interface makes using the device effortless through a 7-inch LCD touch screen that displays at 1024×600 quality.
• Read/clear codes for all available systems
• Display live data in text, graph & analog for easy data review
• Auto VIN technology can automatically identify the vehicle’s make, model and year information in no time
• Reset Steering Angle Sensor (SAS)
• Reset service mileage and service intervals
• Relearn parking brake pad after replacement
• Support forced DPF regeneration and adjusting injectors
•
| Operating System | Android 11 |
| Processor | Cortex-A55 quad-core processor (1.8GHz) |
| Memory | 4GB RAM & 64GB On-board Memory |
| Display | 7-inch LCD capacitive touchscreen with 1024×600 resolution |
| Connectivity | Wi-Fi（802.11a/b/g/n/ac） |
| USB 2.0，Mini USB 2.0 | |
| Wireless BT V2.1+EDR | |
| HDMI Type A | |
| SD Card (Support up to 64GB) | |
| Sensors | Light sensor for brightness auto adjust |
| Audio Input/Output | Input: N/A |
| Output: Beep | |
| Power and Battery | 3.7 V/5000mAh lithium-polymer battery |
| Charges via 5 VDC power supply | |
| Input Voltage | 5 V/1.5 A |
| Operating Temp | 0 to 50°C (32 to 122°F) |
| Storage Temp | -20 to 60°C (-4 to 140°F) |
| Dimensions(WXHX D) | 270.8 mm (10.0”) x 176.0 mm(6.9”) x 36.0 mm (1.4”) |
| Weight | 885g (2.31 lb.) |
| Protocols | ISO9141-2, ISO14230-2, ISO15765, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850PWM, ISo11898(Highspeed, Middlespeed, Lowspeed and Singlewire CAN, fault-tolerant CAN) SAE J2610, GM UART UART Echo Byte Protocol, Honda Diag-H Protocol,TP2.0,TP1.6 |
Out of stock
OBD2 All System Diagnostic Scanner
When it comes to ultra-portability, MaxiCheck MX808 is your perfect companion. Installed with a fast quad-core processor, MX808 offers maximum convenience and swift diagnosis. The intuitive user interface makes using the device effortless through a 7-inch LCD touch screen that displays at 1024×600 quality.
• Read/clear codes for all available systems
• Display live data in text, graph & analog for easy data review
• Auto VIN technology can automatically identify the vehicle’s make, model and year information in no time
• Reset Steering Angle Sensor (SAS)
• Reset service mileage and service intervals
• Relearn parking brake pad after replacement
• Support forced DPF regeneration and adjusting injectors
•
| Operating System | Android 11 |
| Processor | Cortex-A55 quad-core processor (1.8GHz) |
| Memory | 4GB RAM & 64GB On-board Memory |
| Display | 7-inch LCD capacitive touchscreen with 1024×600 resolution |
| Connectivity | Wi-Fi（802.11a/b/g/n/ac） |
| USB 2.0，Mini USB 2.0 | |
| Wireless BT V2.1+EDR | |
| HDMI Type A | |
| SD Card (Support up to 64GB) | |
| Sensors | Light sensor for brightness auto adjust |
| Audio Input/Output | Input: N/A |
| Output: Beep | |
| Power and Battery | 3.7 V/5000mAh lithium-polymer battery |
| Charges via 5 VDC power supply | |
| Input Voltage | 5 V/1.5 A |
| Operating Temp | 0 to 50°C (32 to 122°F) |
| Storage Temp | -20 to 60°C (-4 to 140°F) |
| Dimensions(WXHX D) | 270.8 mm (10.0”) x 176.0 mm(6.9”) x 36.0 mm (1.4”) |
| Weight | 885g (2.31 lb.) |
| Protocols | ISO9141-2, ISO14230-2, ISO15765, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850PWM, ISo11898(Highspeed, Middlespeed, Lowspeed and Singlewire CAN, fault-tolerant CAN) SAE J2610, GM UART UART Echo Byte Protocol, Honda Diag-H Protocol,TP2.0,TP1.6 |
You must be logged in to post a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
AUNCH X431 PRO3S+ Smartlink HD Scanner for Car & Truck (12&24V)
-
Intelligent Diagnostics with Module Topology on Select Vehicles, Enhanced Auto SCAN/ VIN Scan and DTC Analysis/ Repair Guided Assist
-
Factory-Level ECU Coding for ECU Matching, Learning, or code the newly replaced ECU; Customize your car, unfold the hidden features, or disable the annoying functions; Reprograms the adaptive data for certain components after repairs or replacements., Support J2534 ECU Programming for Mainstream Vehicles, for TOYOTA, HONDA, VOLVO, VW, BMW, Ford, GM, Mercedes, SUBRARU, CHRYLSER, LANDROVER, etc.
-
Bi-directional Control: Receive information and send commands to subsystem to perform active tests
-
60+ Service Functions, all in step-by-step instructions, solve all the service/ reset questions
-
Extensive vehicle coverage for more than 200+ US, Asian and European commercial vehicle makes,work for 12V &24 V with no extra FEE, FOR Cars, Trucks, buses, Trailers, Excavators, Diesel engine, Construction machinery, Pick-up, Hybrid vehicle, etc.
8 Add-on Service Modules:
You can perform more comprehensive vehicle inspections with LAUNCH PRO3S+ SMARTLINK HD, need EXTRA-BUY.
-
Scopebox : Quickly acquire the circuit signal, and slowly display the waveform for better data analysis.
-
S2-2 Sensorbox: Specially designed to diagnose and simulator vehicle sensor faults quickly and conveniently.
-
S2-2 Multimeter: Allows you to measure the physical parameters such as voltage, resistance, frequency etc. It utilizes the same hardware as the S2-2 Sensorbox.
-
Videoscope: Allows you to check those unseen parts of engine, fuel tank, braking system. It needs to work with the compatible Videoscope device .
-
BST360 (Battery Tester): allows you to fix battery detection faster and easier. It needs to work with the specific Bluetooth battery tester .
-
TSGUN TPMS Device: allows you to configure the tablet as TPMS activation & diagnostic tool, which provides the ability to trigger TPMS sensor, p-r-o-g-ram TPMS sensor, perform the relearning procedure. It needs to work with the compatible TSGUN device .
-
X-PROG 3 Immobilizer Programmer: Allows you to perform the read-write function for vehicle k.e.ys,EEPROM, MCU, and EEPROM /FLASH of vehicle engine and gearbox ECU, this X431 diagnostic scanner providing fast, easy, and intuitive key pro-gramming for V.A.G group vehicles with 2/3/3.5 gen. IMMO, and most Asian cars with low-level antitheft systems; also to have completed IMMO & Key Programming (read & write 1200+ EEPROM and MCU chips, etc.) for VW/ Audi/ Skoda/ Seat models manufactured after 2008 with 4/ 5/ 5.5/ 6 gen.
-
Wi-Fi Printing: you can print your diagnosis and maintenance report directly by selecting "Print via Wi-Fi".
- New Energy Battery Pack: Supports reading the current SOC/SOH, cell/module voltage, input/output current and power, battery temperature, as well as reading the detailed status information and fault information of the battery pack, automatically calculating the total voltage, voltage difference, maximum/minimum voltage and other index data, automatically labeling the abnormal data, and quickly locating the battery pack problems for 130+New energy vehicles, include BMS_BYD, BMS_HD_BENZ, EV_AUDI, EV_BMW, EV_CHRYSLER, EV_GM, EV_HD_CAMC, EV_HD_GEELY, EV_HD_VOLVO, EV_HONDA, EV_TOYOTA, EV_TESLA, EV_RENAULT,etc.
- Mall service: Get more special function and advanced function.
THE MOST HIGH-END INTELLIGENT DIAGNOSTIC TOOL FOR PASSENGER & COMMERCIAL VEHICLES
OEM ALL SYSTEM SCANNER FOR 200+ CAR BRANDS, ECU CODING, 60+ RESET, CARS & TRUCKS FULL CONNECTOR KITS
MaxiSYS MS906 Pro جهازتشخيص احترافي
OBDII Bi-Directional Diagnostic Scanner-
MaxiSYS MS906Pro is an advanced diagnostic tablet compatible with U.S., Asian and European vehicles, 1996 and newer. This 8-inch wireless Android-based touchscreen tablet performs extensive vehicle diagnostics including an all systems scan with ADAS identification, the ability to read/erase codes, view freeze frame and live data, bi-directional control including active testing, coding and adaptations. Includes customizable Pre/Post scans, extensive service menu with 25 of the most of common maintenance tasks. FCA Access via AutoAuth account, starting and charging system analysis with MaxiBAS BT506 Bluetooth tester and terminal cables purchase, ADAS Calibrations capable (frame system and software upgrade required).
Hardware:
• 8-inch, 1920 x 1200 high-resolution touchscreen tablet, Qualcomm 660 Octa-core processor with 128 GB storage and running Android 10.0 operating system.
• Long-lasting 11,600 mAh rechargeable battery, 16 MP front camera and 16 MP rear camera.
• MaxiVCI V200 wireless Bluetooth vehicle communication interface supporting the latest communication protocols
Software:
• Comprehensive diagnostics on 1996 and newer U.S., Asian and European vehicles
• AutoScan: Scan all available systems, including ADAS identification
• Read/Erase Codes, View Freeze Frame and Live Data
• Perform Active Tests (bi-directional controls), Coding and Adaptations
• AutoVIN/Scan VIN for rapid vehicle identification
• Perform ADAS (inc. Camera/s, Radar, LiDAR, Night Vision) Systems Calibrations with additional purchase.
New Software Features
• Battery analyzation capability*
• Cloud-based Reports and Data Management
• Remote Expert (coming soon)
* With additional purchase of the MaxiBAS BT506 battery and electrical system tester.
** with purchase of ADAS calibration frame system and software
OBD Master millage correction
Hardware Advantages
1. Built-in VCI box
2. 5-inch touchscreen
3. Charge directly via OBD interface
4. Practical and high-end gift box
5. Industrial design with silicone case
Add “Help” Functions
1. including built-in testable vehicle models, upgrade announcement, features, help notes and wiring diagrams, etc
2. Carlist and upgrade announcement, all details are available on the device
3. Customers can look up the features or uniquely support functions on the device
4. Help notes: built-in help notes for each model or function
MPVI 3
BUILT FOR ENTHUSIASTS AND PROFESSIONALS –
Introducing MPVI3 by HP Tuners, the fastest and most sophisticated OBDII interface device to date. Now standard with Pro Feature Set (PROLINK+ cable sold separately).
BIGGER, BETTER, FASTER.
Pro is the new standard with MPVI3. Take advantage of Pro Feature Set capabilities like standalone data logging and PROLINK+ compatibility (sold separately) already built into your new device. MPVI3 redefines the limits of speed and control with faster standalone data logging and 2X the storage capacity compared to the previous generation. Log more runs (faster) and store more calibrations on your MPVI3, all with the convenience of eliminating your laptop from the equation.
But don’t be fooled, MPVI3 continues the legacy of its predecessor with features like Bluetooth 5.0, an M8 motorsports-grade screw-on connector, RGB LEDs, and USB-C connectivity (4MB/s).
Reviews
There are no reviews yet.