MaxiSYS MS906 Pro TS

• Intelligent Diagnostics with Module Topology on Select Vehicles, Enhanced Auto SCAN/ VIN Scan and DTC Analysis/ Repair Guided Assist
• Factory-Level ECU Coding for ECU Matching, Learning, or code the newly replaced ECU; Customize your car, unfold the hidden features, or disable the annoying functions; Reprograms the adaptive data for certain components after repairs or replacements., Support J2534 ECU Programming for Mainstream Vehicles, for TOYOTA, HONDA, VOLVO, VW, BMW, Ford, GM, Mercedes, SUBRARU, CHRYLSER, LANDROVER, etc.
• Bi-directional Control: Receive information and send commands to subsystem to perform active tests
• 60+ Service Functions, all in step-by-step instructions, solve all the service/ reset questions
• Extensive vehicle coverage for more than 200+ US, Asian and European commercial vehicle makes,work for 12V &24 V with no extra FEE, FOR Cars, Trucks, buses, Trailers, Excavators, Diesel engine, Construction machinery, Pick-up, Hybrid vehicle, etc. 

More: FCA AutoAuth; CAN FD/DoIP Protocols; Auto Scan; Pre & Post Scan; 12-in-1 Live Data Monitor in Graphic; VAG Guided Function; Non-16pin Connectors & Cables Kit; 2 Years Free Updates etc. Best Choice for : Technician, advance DIY, garage, car dealer, used car dealer, auto repair shop, automotive engineer, diagnostic tech, truck man, automobile tech, home mechanic, DIY beginner, automotive student, backyard mechanic, retired mechanic, weekend DIY, individual.

8 Add-on Service Modules:
You can perform more comprehensive vehicle inspections with LAUNCH PRO3S+ SMARTLINK HD, need EXTRA-BUY.

• Scopebox : Quickly acquire the circuit signal, and slowly display the waveform for better data analysis.
• S2-2 Sensorbox: Specially designed to diagnose and simulator vehicle sensor faults quickly and conveniently.
• S2-2 Multimeter: Allows you to measure the physical parameters such as voltage, resistance, frequency etc. It utilizes the same hardware as the S2-2 Sensorbox.
• Videoscope: Allows you to check those unseen parts of engine, fuel tank, braking system. It needs to work with the compatible Videoscope device .
• BST360 (Battery Tester): allows you to fix battery detection faster and easier. It needs to work with the specific Bluetooth battery tester .
• TSGUN TPMS Device: allows you to configure the tablet as TPMS activation & diagnostic tool, which provides the ability to trigger TPMS sensor, p-r-o-g-ram TPMS sensor, perform the relearning procedure. It needs to work with the compatible TSGUN device .
• X-PROG 3 Immobilizer Programmer: Allows you to perform the read-write function for vehicle k.e.ys,EEPROM, MCU, and EEPROM /FLASH of vehicle engine and gearbox ECU, this X431 diagnostic scanner providing fast, easy, and intuitive key pro-gramming for V.A.G group vehicles with 2/3/3.5 gen. IMMO, and most Asian cars with low-level antitheft systems; also to have completed IMMO & Key Programming (read & write 1200+ EEPROM and MCU chips, etc.) for VW/ Audi/ Skoda/ Seat models manufactured after 2008 with 4/ 5/ 5.5/ 6 gen.
• Wi-Fi Printing: you can print your diagnosis and maintenance report directly by selecting "Print via Wi-Fi".
• New Energy Battery Pack: Supports reading the current SOC/SOH, cell/module voltage, input/output current and power, battery temperature, as well as reading the detailed status information and fault information of the battery pack, automatically calculating the total voltage, voltage difference, maximum/minimum voltage and other index data, automatically labeling the abnormal data, and quickly locating the battery pack problems for 130+New energy vehicles, include BMS_BYD, BMS_HD_BENZ, EV_AUDI, EV_BMW, EV_CHRYSLER, EV_GM, EV_HD_CAMC, EV_HD_GEELY, EV_HD_VOLVO, EV_HONDA, EV_TOYOTA, EV_TESLA, EV_RENAULT,etc.
• Mall service: Get more special function and advanced function.

Smartphone All System Scan Tool App With Bluetooth OBD2 Adapter

The wireless diagnostic interface MaxiAP AP200 is a small interface adapter used to connect to a vehicle’s diagnostic connector (DLC) and connect with the Android or iOS device for vehicle data transmission, making your Android or iOS devices (hereinafter referred to as device or devices) a powerful diagnostic tool. The MaxiAP AP200 package includes a Bluetooth (BT) OBDII connector and a MaxiAP200 app. It is the perfect Do-It-Yourself tool for customers looking for quick and easy diagnostic functions of all systems. It is almost compatible with all vehicle models of European, Asian, and North America makes.

All OBDII functions are available and free

• One free vehicle’s software with the initial purchase

• Support up to 19 specific functions, including Oil Reset, EPB, BMS, SAS, DPF, TPMS, IMMO, etc.

• Expand coverage with additional in-app purchase

• Auto VIN technology identifies vehicles automatically

• Generate repair reports of tested vehicles and support PDF format for easy sharing and printing

• Keep records of vehicles tested previously

• 14 languages switch freely