TA110 Laser Tachometer and Counter
ر.ع.50.00
Description
The TA110 Laser Tachometer and counter can be used to measure and test the number of rotations per minute (RPM) or total number of rotations or events on any spinning shaft, pulley, wheel, drive belt, fan, or other rotating objects in general, safely, accurately and easily due to its unique ergonomic design. Numerous application uses can be found in industrial, automotive, heavy duty, HVAC, agricultural and aviation maintenance sectors.
Wide measuring range: 60 to 99,999 RPM or count, 2″ to 20″ reading distance, Min/max memory recall, backlit display, <0.3 sec response time, count function and auto power off.
Applications
- Internal combustion engines
- Electric motors
- Rotating machinery
Features
- State of the Art patented ergonomic design
- Measures from 60 to 99999 RPM
- 0.05 % accuracy
- 2 to 20″ (50 to 500 mm) measuring range
- Quick selection between RPM and Count functions
- Maximum and minimum memory recall functions
- Continuous reading and data hold modes
- Quick response: <0.3 seconds
- Large LCD display with symbols and backlight
- On target display indicator
- RPM, Total revolutions, maximum, minimum and last reading memory
- Laser powered optical system is easy to use under all light conditions
- Only setup required is a reflective mark on the rotating part
Specifications
- Display:
- 5 x 0.7″ (16mm)digits display
- Backlight
- On target indicator
- RPM indicator
- Low battery indicator
- Accuracy: ±(0.05%+1 Digit)
- Operating Temperature: 32°F to 122°F (0°C to 50°C)
- Response time: >0.3 sec.(over 120 RPM)
- Range Selection: Auto Ranging
- Memory: Max. value, Min. value and display hold stored automatically in memory
- Distance to target: 2″ to 20″ (50 mm to 500 mm)
- Laser Pointer: Laser Diode, < 1mW output wavelength 630-670 nm, Class II
- Power Source: 9-volt alkaline battery type NEDA 1604
- Battery life: Approx. 5 hours.(w/alkaline batteries)
- Dimensions: 3.13″x 1.88″x 7.0″ (80 x 48 x 178 mm)
- Weight: 7.6 oz. (215 g) including battery
How-To
- Attach a small piece of reflective tape to the shaft or rotating part, aim the laser beam to the reflective mark and read the RPM or revolutions count on the large display.
- Maximum, minimum and last reading are automatically saved into the internal memory of the instrument, and can be recalled at any time
- Bright and powerful laser optical system allows for easy targeting of rotating shaft, wheel, etc., even in bright daylight.
- Measurement can be obtained from safe and comfortable distances from 2″ to 200″
The large 5 digits digital display allows measurements of up to 99,999 RPM without need to switch scales or multiply readings.
3
Out of stock
Description
The TA110 Laser Tachometer and counter can be used to measure and test the number of rotations per minute (RPM) or total number of rotations or events on any spinning shaft, pulley, wheel, drive belt, fan, or other rotating objects in general, safely, accurately and easily due to its unique ergonomic design. Numerous application uses can be found in industrial, automotive, heavy duty, HVAC, agricultural and aviation maintenance sectors.
Wide measuring range: 60 to 99,999 RPM or count, 2″ to 20″ reading distance, Min/max memory recall, backlit display, <0.3 sec response time, count function and auto power off.
Applications
- Internal combustion engines
- Electric motors
- Rotating machinery
Features
- State of the Art patented ergonomic design
- Measures from 60 to 99999 RPM
- 0.05 % accuracy
- 2 to 20″ (50 to 500 mm) measuring range
- Quick selection between RPM and Count functions
- Maximum and minimum memory recall functions
- Continuous reading and data hold modes
- Quick response: <0.3 seconds
- Large LCD display with symbols and backlight
- On target display indicator
- RPM, Total revolutions, maximum, minimum and last reading memory
- Laser powered optical system is easy to use under all light conditions
- Only setup required is a reflective mark on the rotating part
Specifications
- Display:
- 5 x 0.7″ (16mm)digits display
- Backlight
- On target indicator
- RPM indicator
- Low battery indicator
- Accuracy: ±(0.05%+1 Digit)
- Operating Temperature: 32°F to 122°F (0°C to 50°C)
- Response time: >0.3 sec.(over 120 RPM)
- Range Selection: Auto Ranging
- Memory: Max. value, Min. value and display hold stored automatically in memory
- Distance to target: 2″ to 20″ (50 mm to 500 mm)
- Laser Pointer: Laser Diode, < 1mW output wavelength 630-670 nm, Class II
- Power Source: 9-volt alkaline battery type NEDA 1604
- Battery life: Approx. 5 hours.(w/alkaline batteries)
- Dimensions: 3.13″x 1.88″x 7.0″ (80 x 48 x 178 mm)
- Weight: 7.6 oz. (215 g) including battery
How-To
- Attach a small piece of reflective tape to the shaft or rotating part, aim the laser beam to the reflective mark and read the RPM or revolutions count on the large display.
- Maximum, minimum and last reading are automatically saved into the internal memory of the instrument, and can be recalled at any time
- Bright and powerful laser optical system allows for easy targeting of rotating shaft, wheel, etc., even in bright daylight.
- Measurement can be obtained from safe and comfortable distances from 2″ to 200″
The large 5 digits digital display allows measurements of up to 99,999 RPM without need to switch scales or multiply readings.
3
You must be logged in to post a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Wireless ChassisEAR 2 Automotive Diagnostic Noise Finder
Wireless ChassisEAR 2 Automotive Diagnostic Noise Finder
The STEELMAN PRO 60605 Wireless ChassisEAR 2 is an upgrade on the classic that utilizes several advancements and improvements to help quickly pinpoint squeaks, rattles, and any other troublesome and errant noises across a vehicle's engine, axles, and chassis. Ideal for diagnosing faulty fuel injectors, bearings, gears, suspensions, transmissions, differentials and CV joints, and under hoods, this tool works as a high powered wireless stethoscope for your car or truck. The main control unit features a 4.3-inch color LCD touchscreen to coordinate the signals from the included transmitters via an easy to use interface and its' internal rechargeable battery can provide up to 3.5-hours of continuous runtime per charge. Each of the 4 independent transmitters connects to a piezoelectric microphone clamp and can be placed in a separate location around the vehicle. Included with the kit are hook-and-loop straps and zip ties for added security against clamps coming free during road tests. For instances with confined spaces, cable extensions are included for each transmitter that allow clamp and transmitter to be mounted separately. Each transmitter can be toggled to one of 6 selectable channels on the receiver and can be selected or muted individually to make pinpointing the location and cause of a noise easy. Kit includes 4 transmitters, 1 receiver unit, 1 set of over-ear headphones, 4 microphone clamps, 4 jumper extensions, 6 nylon zip tie straps, 6 hook-and-loop straps, transmitter charging station, AC adapter, USB charging cable, color coded transmitter boots, instruction manual, and a canvas storage bag.
- NOISE DETECTION - Detect the source or squeaks, rattles, and other errant or troublesome noises throughout a car or truck's chassis
- 4 WIRELESS TRANSMITTERS - Kit includes 4 independent transmitters that can be mounted in locations across the vehicle
- LCD TOUCHSCREEN - 4.3-inch color LCD touch sensitive screen equipped control unit with easy to use interface
- TRANSMITTER JUMPERS - Transmitter jumpers allow separate mounting of clamps and transmitters in confined spaces
- EASY IDENTIFICATION - Color coded boots and location naming in software to quickly locate trouble spots
- RECHARGEABLE - Control unit and transmitters feature internal rechargeable batteries
- ACCESSORIES - Kit includes 12 tie down straps, transmitter charging station and a canvas storage bag
PRODUCT SPECIFICATIONS
| Color: | Black |
|---|---|
| Material: | ABS, Steel, Rubber |
| Overall Dimensions: | 14.43 in. L x 7.25 in. W x 9.31 in. H |
| Item Weight (lb.): | 5.07 |
| Warranty: | 90 Day Limited Warranty |
| Country of Origin: | China |
PFP-100 Programming Flash Power
LAUNCH PFP-100 Programming Flash Power is a must tool for vehicle diagnosis. It can prevent failure and abnormal during the process of programming due to low voltage.
Features:
1. 5 Protection Modes: Reverse Protection, Short Circuit Protection, Low Voltage Protection, Overheat Protection, Overcharge Protection, Synchronous Rectification (220V only)
2. Charging Mode: The regular mode for battery that under normal condition
3. Exhibit Mode: Charging the battery continually in small current in showroom
4. Programming Mode: The programming voltage of 12-16V can be directly selected
5. Hidden Repair Mode: Auto repair if there is a minor issue of batter
pecification:
|
Input Voltage |
110V, 220~240V/50~60Hz |
|
Power |
1200W |
|
Max. Current |
100A |
|
Charging Voltage |
12V |
|
Programming Mode |
2~16V/2~100A |
|
MAH |
10~1200Ah |
|
Electric Cable Length |
3m |
|
Weight |
8.5kg |
|
Dimension |
430*380*140mm |
CM100 AC/DC Current Clamp Meter
Description
Who it’s For:
- Automotive, marine, and heavy duty technicians who troubleshoot vehicle electronics and electrical systems
- Aftermarket installers looking to test or troubleshoot new equipment
- Technicians looking to test starter motors or large electrical loads like refrigeration units should look at our CM600.
What it Does:
Quickly and easily measures circuit current consumption, as well as voltages and resistances.
How it Works:
- Turn the unit on by turning the selector wheel to the mode of interest
- Position the CM100 near and parallel to the wire or cable, with the jaw closed
- Press the zero/tare button to compensate for interference
- Open the jaw, put it around the wire, and allow it to close
- Read the circuit’s AC or DC current consumption off the high-contrast liquid crystal display
Warranty & Support:
Covered by our standard 1-year warranty, and supported for much longer. Replacement parts and accessories are generally available for 10+ years.
Applications
- Electronic and electrical circuits
- Automobiles
- Trucks
- Trailers
- Boats
- RVs
- All 0 to 100 Volt AC/DC powered circuits
Features
The CM100 low current clamp meter is designed to accurately measure current, current leaks (parasitic draws down to 1mA) and electrical loads from 1mA to 100 amp AC/DC and voltages from 0 to 600 AC/DC. The CM100 can be used on electric motors, fuel pumps, charging systems, electrical circuits, etc.
The small diameter (½ inch or 13mm) and narrow jaw makes it ideal for use in confined spaces and on small gauge wires. Other features include up to 600 volt AC/DC voltage, resistance measurement functions, audible continuity test, display hold and peak detector.
- ACCURATE MEASUREMENT: Measures electrical loads from 1mA to 100 amp AC/DC and voltages from 0 to 600 AC/DC.
- EASY TO READ AND USE: Large 4 digit LCD display, one touch auto-zero, and audio feedback.
- MULTI-PURPOSE: Check and troubleshoot grounds, voltage drops, currents in battery chargers, alternators, electrical loads, and more.
- DURABLE: Rugged plastic enclosure, 50 hours battery life, with a carrying case for safe storage.
- COMFORTABLE: Quality design offers comfortable handling, and a smaller jaw for ease of use.
Coating Thickness Gauge
pating Thickness Gauge GC8102 was developed for a
broad spectrum of use in the automobile and painting
industries. This compact gauge allows for extremely
accurate measurements of paint and corrosion protection
thicknesses, both on steel and iron as well as on nonferrous metals such as aluminum, zinc or copper.
High measuring accuracy over the entire measuring range.
One-hand operation, use directly.
Easy, safe and fast measurements..
Measure mode : CarHandy ,CarPro ,2 mode selectable.
Memory: 999 cars datas can stock .
Unit: Metric/Imperial switchable (mil/um selectable)
Backlight: Brightness adjustable, clear and easy reading under any light Condition
Alarm : Set higher and lower alarm range for measuring
Calibration : Zero-Calibration, 1 points calibration and 5-point calibration
Detect : Metal Putty detect ,Zn detect
Battery: Low battery indication and auto shut off
Data transfer: USB/Bluetooth.
APP: Android App , iOS App
Language : English (other language can customized )
Data Delete: Delete a single data or clear all the data
Probe select :Automatically detects ferrous and non-ferrous substrates
Specification
Range: 0-3000μm/0-120 mil
Resolution: 0.1μm（0~99.9μm）；1μm（100~3000μm）
Accuracy: ±(1+2%H μm),H:coating thickness
Display: Easy to read LCD screen
Test Limits: Surface curvature: convex 5 mm / concave 5 mm
Minimum test surface: Φ10mm
Minimum thickness of base material: 0.4mm
Operation Condition(not in high magnetic field):
Temperature:-20°c-50°c Humidity: 10%RH-85RH
MaxiVideo MV105/108
• White LED lights to illuminate the inspection areas.
• Small diameter allows it to be used in the tight spaces.
• Wonderful for up-close visual inspections in confined areas, such as engine cylinders and small part inspections.
• Powerful and perfect for inspecting most spark plug holes.
• Super bright LED and high resolution provide crystal clear images.
Reviews
There are no reviews yet.