368Pc. Automotive Tool Set (With 7 Drawer Trolley)
ر.ع.580.00
troduction
| ● | General repair tool set, applicable to most of daily maintenance in repair shops and express repair shops | ||||
| ● | Size of the tool cart please refer to 95126 | ||||
| Layer 1 | |||||
| ● |
20-piece 12.5MM series hexagon socket (8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32MM) |
||||
| ● |
14-piece 12.5MM series long hexagon socket (10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22,24MM) |
||||
| ● | 20-piece 12.5MM series bihexagon socket set (8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,27,30,32MM) | ||||
| ● | 4-piece 12.5MM series long bihexagon socket set (10,12,17,19MM) | ||||
| ● | 4-piece 1/2” series hexagon impact socket (17, 19, 21, 23MM) | ||||
| ● | 1-piece 12.5MM series special quick release ratchet wrench 10” | ||||
| ● | 1-piece 12.5MM series L-type wrench 10″ | ||||
| ● | 1-piece 12.5MM series sliding T-bar 10” | ||||
| ● | 1-piece 12.5MM series universal joint | ||||
| ● |
1-piece 12.5MM series adapter (1/2″ square hole x 3/8″ square head) |
||||
| ● |
1-piece 12.5MM sliding head (1/2″ square hole x 3/8”square head) |
||||
| ● | 2-piece 12.5MM series wobble socket set (5″,10″) | ||||
| ● | 1-piece 12.5MM series bit adapter 5/16 | ||||
| Layer 2 | |||||
| ● |
23-piece full polish combination wrench set (6,7,8,9,10,11,12,13,14,15,16,17,18,19 20,21,22,23,24,25, 27,30,32MM) |
||||
| ● |
13-piece full polish double open end wrench set (6×7,8×10,10×12,12×14,13×15,13×16,14×17,16×18,17×19,19×21, 22×24,24×27,30x32MM) |
||||
| Layer 3 | |||||
| ● | 1-piece German external snap ring pliers with straight tips 7” | ||||
| ● | 1-piece German external snap ring pliers with curved tips 7″ | ||||
| ● | 1-piece German internal snap ring pliers with straight tips 7″ | ||||
| ● | 1-piece German internal snap ring pliers with curved tips 7″ | ||||
| ● | 1-piece long nose pliers 6″ | ||||
| ● | 1-piece diagonal cutting pliers 6” | ||||
| ● | 1-piece linesman pliers 8″ | ||||
| ● | 1-piece slip-joint pliers 8″ | ||||
| ● | 1-piece curved jaw locking pliers 10” | ||||
| ● | 1-piece A series slotted screwdriver with through blade 6x150MM | ||||
| ● | 1-piece A series Phillips screwdriver with through blade #2x150MM | ||||
| ● |
4-piece A series slotted screwdriver (3.2×75, 5×100, 6×38, 6x100MM) |
||||
| ● |
4-piece A series Phillips screwdriver (#0x75, #1×75, #2×38, #2x100MM) |
||||
| ● | 1-piece Kairui series steel tape measure 5 M x 19MM | ||||
| ● | |||||
| ● | Layer 4 | ||||
| ● |
7-piece 8MM series 70MM long hex bit set (4, 5, 6, 7, 8, 10, 12MM) |
||||
| ● |
5-piece 8MM series 70MM long bihexagon bit (M5, M6, M8, M10, M12) |
||||
| ● |
8-piece 8MM series 70MM long Torx bit (T20, T25, T27, T30, T40, T45, T50, T55) |
||||
| ● |
7-piece 8MM series 30MM long hex bit set (4, 5, 6, 7, 8, 10, 12MM) |
||||
| ● |
5-piece 8MM series 30MM long bihexagon bit (M5, M6, M8, M10, M12) |
||||
| ● |
6-piece 8MM series 30MM long center hole Torx bit (TT20, TT25, TT30, TT40, TT45, TT50) |
||||
| ● | 1-piece 10MM series bit adapter 5/16 | ||||
| ● |
12-piece 10MM series hexagon socket set (8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19MM) |
||||
| ● |
10-piece 10MM series long hexagon socket (8, 9, 10, 11, 12, 13, 14, 15, 17, 19MM) |
||||
| ● |
8-piece 10MM series hexagon Torx socket (E8, E10, E11, E12, E14, E16, E18, E20) |
||||
| ● |
9-piece 10MM series Torx bit socket (T10, T15, T20, T25, T27, T30, T40, T45, T50) |
||||
| ● |
7-piece 10MM series hex bit socket (3, 4, 5, 6, 7, 8, 10MM) |
||||
| ● | 3-piece 10MM series Phillips bit socket set (#1, #2, #3) | ||||
| ● | 2-piece 10MM series slotted bit socket (5.5, 6.5MM) | ||||
| ● |
13-piece 6.3MM series hexagon socket set (4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14MM) |
||||
| ● |
10-piece 6.3MM series long hexagon socket (4,5,6,7,8,9,10,11,12,13MM) |
||||
| ● | 6-piece 6.3MM series hex bit socket (3, 4, 5, 6, 7, 8MM) | ||||
| ● | 3-piece 6.3MM series Philips bit socket (#1, #2, #3) | ||||
| ● | 3-piece 6.3MM series Philips bit socket (#1, #2, #3) | ||||
| ● | 3-piece 6.3MM series slotted bit socket (4, 5.5, 6.5MM) | ||||
| ● |
7-piece 6.3MM series Torx bit socket (T8, T10, T15, T20, T25, T30, T40) |
||||
| ● | 1-piece 10MM series special quick release ratchet wrench 8” | ||||
| ● | 3-piece 10MM series wobble socket (3″, 6″, 10″) | ||||
| ● | 1-piece 10MM series sliding T-bar 8” | ||||
| ● | 1-piece 10MM series universal joint | ||||
| ● |
1-piece 10MM series adapter (3/8″ square hole x 1/4″ square head) |
||||
| ● |
1-piece 10MM series adapter (3/8″ square hole x 1/2″ square head) |
||||
| ● | 2-piece 10MM series spark plug socket set (16, 21MM) | ||||
| ● | 1-piece 10MM series thin-wall bihexagon spark plug socket 14MM | ||||
| ● |
1-piece 10MM series sliding head (3/8″ square hole x 1/2″ square head) |
||||
| ● | 1-piece 6.3MM series special quick release ratchet wrench 5” | ||||
| ● | 2-piece 6.3MM series wobble socket set (2″, 4″) | ||||
| ● | 1-piece 6.3MM series sliding T-bar 4” | ||||
| ● | 1-piece 6.3MM series bit handle | ||||
| ● | 1-piece 6.3MM series universal joint | ||||
| ● | 1-piece 6.3MM series adapter (1/4″ square hole x 3/8″ square head) | ||||
| ● | 1-piece 6.3MM series flexible adapter 6″ | ||||
| ● | 1-piece M16 oil pan drain socket bit (with hole) | ||||
| ● | 1-piece H17 oil pan socket bit | ||||
| ● | 1-piece T52 engine cylinder head screw bit socket | ||||
| Layer 5 | |||||
| ● |
11-piece full polish double box end wrench set (10×12,12×14,13×15,13×16,14×17,16×18,17×19,19×21, 19×22,22×24,24 x 27MM) |
||||
| ● |
2-piece T series slotted screwdriver with through blade set (8 x 150, 8 x 200MM) |
||||
| ● |
2-piece T series Phillips screwdriver with through blade (#3×150, #3x200MM) |
||||
| ● |
12-piece full polish pipe wrench (6,7,8,9,10,11,12,13,14,15,16,17MM) |
||||
| ● | 1-piece adjustable wrench 10″ | ||||
| Layer 6 | |||||
| ● | 1-piece flexible magnetic pickup tool 400MM x 1KG | ||||
| ● | 1-piece pry bars driver | ||||
| ● | 5-piece interior trims remover set | ||||
| ● | 9-piece extra long ball joint hex key set | ||||
| ● | 9-piece long center hole Torx wrench set | ||||
| ● | 5-piece punch set | ||||
| ● | 5-piece fine thread tap extractor set | ||||
| ● | 1-piece automotive circuit tester 6V/12V/24V | ||||
| ● | 1-piece air blow gun 100MM | ||||
| ● | 1-piece 13-section snap-off knife with movable plastic handle 9x80MM | ||||
| ● | 1-piece FRP ball peen hammer 1.5lb | ||||
| ● | 1-piece dead blow soft rubber hammer 55MM | ||||
| ● | 14-piece feeler gauge set 0.05-1.00MM | ||||
| ● | 1-piece filter combination wrench 63-102MM |
Out of stock
troduction
| ● | General repair tool set, applicable to most of daily maintenance in repair shops and express repair shops | ||||
| ● | Size of the tool cart please refer to 95126 | ||||
| Layer 1 | |||||
| ● |
20-piece 12.5MM series hexagon socket (8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32MM) |
||||
| ● |
14-piece 12.5MM series long hexagon socket (10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22,24MM) |
||||
| ● | 20-piece 12.5MM series bihexagon socket set (8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,27,30,32MM) | ||||
| ● | 4-piece 12.5MM series long bihexagon socket set (10,12,17,19MM) | ||||
| ● | 4-piece 1/2” series hexagon impact socket (17, 19, 21, 23MM) | ||||
| ● | 1-piece 12.5MM series special quick release ratchet wrench 10” | ||||
| ● | 1-piece 12.5MM series L-type wrench 10″ | ||||
| ● | 1-piece 12.5MM series sliding T-bar 10” | ||||
| ● | 1-piece 12.5MM series universal joint | ||||
| ● |
1-piece 12.5MM series adapter (1/2″ square hole x 3/8″ square head) |
||||
| ● |
1-piece 12.5MM sliding head (1/2″ square hole x 3/8”square head) |
||||
| ● | 2-piece 12.5MM series wobble socket set (5″,10″) | ||||
| ● | 1-piece 12.5MM series bit adapter 5/16 | ||||
| Layer 2 | |||||
| ● |
23-piece full polish combination wrench set (6,7,8,9,10,11,12,13,14,15,16,17,18,19 20,21,22,23,24,25, 27,30,32MM) |
||||
| ● |
13-piece full polish double open end wrench set (6×7,8×10,10×12,12×14,13×15,13×16,14×17,16×18,17×19,19×21, 22×24,24×27,30x32MM) |
||||
| Layer 3 | |||||
| ● | 1-piece German external snap ring pliers with straight tips 7” | ||||
| ● | 1-piece German external snap ring pliers with curved tips 7″ | ||||
| ● | 1-piece German internal snap ring pliers with straight tips 7″ | ||||
| ● | 1-piece German internal snap ring pliers with curved tips 7″ | ||||
| ● | 1-piece long nose pliers 6″ | ||||
| ● | 1-piece diagonal cutting pliers 6” | ||||
| ● | 1-piece linesman pliers 8″ | ||||
| ● | 1-piece slip-joint pliers 8″ | ||||
| ● | 1-piece curved jaw locking pliers 10” | ||||
| ● | 1-piece A series slotted screwdriver with through blade 6x150MM | ||||
| ● | 1-piece A series Phillips screwdriver with through blade #2x150MM | ||||
| ● |
4-piece A series slotted screwdriver (3.2×75, 5×100, 6×38, 6x100MM) |
||||
| ● |
4-piece A series Phillips screwdriver (#0x75, #1×75, #2×38, #2x100MM) |
||||
| ● | 1-piece Kairui series steel tape measure 5 M x 19MM | ||||
| ● | |||||
| ● | Layer 4 | ||||
| ● |
7-piece 8MM series 70MM long hex bit set (4, 5, 6, 7, 8, 10, 12MM) |
||||
| ● |
5-piece 8MM series 70MM long bihexagon bit (M5, M6, M8, M10, M12) |
||||
| ● |
8-piece 8MM series 70MM long Torx bit (T20, T25, T27, T30, T40, T45, T50, T55) |
||||
| ● |
7-piece 8MM series 30MM long hex bit set (4, 5, 6, 7, 8, 10, 12MM) |
||||
| ● |
5-piece 8MM series 30MM long bihexagon bit (M5, M6, M8, M10, M12) |
||||
| ● |
6-piece 8MM series 30MM long center hole Torx bit (TT20, TT25, TT30, TT40, TT45, TT50) |
||||
| ● | 1-piece 10MM series bit adapter 5/16 | ||||
| ● |
12-piece 10MM series hexagon socket set (8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19MM) |
||||
| ● |
10-piece 10MM series long hexagon socket (8, 9, 10, 11, 12, 13, 14, 15, 17, 19MM) |
||||
| ● |
8-piece 10MM series hexagon Torx socket (E8, E10, E11, E12, E14, E16, E18, E20) |
||||
| ● |
9-piece 10MM series Torx bit socket (T10, T15, T20, T25, T27, T30, T40, T45, T50) |
||||
| ● |
7-piece 10MM series hex bit socket (3, 4, 5, 6, 7, 8, 10MM) |
||||
| ● | 3-piece 10MM series Phillips bit socket set (#1, #2, #3) | ||||
| ● | 2-piece 10MM series slotted bit socket (5.5, 6.5MM) | ||||
| ● |
13-piece 6.3MM series hexagon socket set (4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14MM) |
||||
| ● |
10-piece 6.3MM series long hexagon socket (4,5,6,7,8,9,10,11,12,13MM) |
||||
| ● | 6-piece 6.3MM series hex bit socket (3, 4, 5, 6, 7, 8MM) | ||||
| ● | 3-piece 6.3MM series Philips bit socket (#1, #2, #3) | ||||
| ● | 3-piece 6.3MM series Philips bit socket (#1, #2, #3) | ||||
| ● | 3-piece 6.3MM series slotted bit socket (4, 5.5, 6.5MM) | ||||
| ● |
7-piece 6.3MM series Torx bit socket (T8, T10, T15, T20, T25, T30, T40) |
||||
| ● | 1-piece 10MM series special quick release ratchet wrench 8” | ||||
| ● | 3-piece 10MM series wobble socket (3″, 6″, 10″) | ||||
| ● | 1-piece 10MM series sliding T-bar 8” | ||||
| ● | 1-piece 10MM series universal joint | ||||
| ● |
1-piece 10MM series adapter (3/8″ square hole x 1/4″ square head) |
||||
| ● |
1-piece 10MM series adapter (3/8″ square hole x 1/2″ square head) |
||||
| ● | 2-piece 10MM series spark plug socket set (16, 21MM) | ||||
| ● | 1-piece 10MM series thin-wall bihexagon spark plug socket 14MM | ||||
| ● |
1-piece 10MM series sliding head (3/8″ square hole x 1/2″ square head) |
||||
| ● | 1-piece 6.3MM series special quick release ratchet wrench 5” | ||||
| ● | 2-piece 6.3MM series wobble socket set (2″, 4″) | ||||
| ● | 1-piece 6.3MM series sliding T-bar 4” | ||||
| ● | 1-piece 6.3MM series bit handle | ||||
| ● | 1-piece 6.3MM series universal joint | ||||
| ● | 1-piece 6.3MM series adapter (1/4″ square hole x 3/8″ square head) | ||||
| ● | 1-piece 6.3MM series flexible adapter 6″ | ||||
| ● | 1-piece M16 oil pan drain socket bit (with hole) | ||||
| ● | 1-piece H17 oil pan socket bit | ||||
| ● | 1-piece T52 engine cylinder head screw bit socket | ||||
| Layer 5 | |||||
| ● |
11-piece full polish double box end wrench set (10×12,12×14,13×15,13×16,14×17,16×18,17×19,19×21, 19×22,22×24,24 x 27MM) |
||||
| ● |
2-piece T series slotted screwdriver with through blade set (8 x 150, 8 x 200MM) |
||||
| ● |
2-piece T series Phillips screwdriver with through blade (#3×150, #3x200MM) |
||||
| ● |
12-piece full polish pipe wrench (6,7,8,9,10,11,12,13,14,15,16,17MM) |
||||
| ● | 1-piece adjustable wrench 10″ | ||||
| Layer 6 | |||||
| ● | 1-piece flexible magnetic pickup tool 400MM x 1KG | ||||
| ● | 1-piece pry bars driver | ||||
| ● | 5-piece interior trims remover set | ||||
| ● | 9-piece extra long ball joint hex key set | ||||
| ● | 9-piece long center hole Torx wrench set | ||||
| ● | 5-piece punch set | ||||
| ● | 5-piece fine thread tap extractor set | ||||
| ● | 1-piece automotive circuit tester 6V/12V/24V | ||||
| ● | 1-piece air blow gun 100MM | ||||
| ● | 1-piece 13-section snap-off knife with movable plastic handle 9x80MM | ||||
| ● | 1-piece FRP ball peen hammer 1.5lb | ||||
| ● | 1-piece dead blow soft rubber hammer 55MM | ||||
| ● | 14-piece feeler gauge set 0.05-1.00MM | ||||
| ● | 1-piece filter combination wrench 63-102MM |
You must be logged in to post a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Valve seat and guide cutting machine TS60
VALVE SEAT AND VALVE GUIDE CUTTING MACHINE
TS 60 IS HIGH PRECISION MACHINE FEATURING THE LATEST TECHNOLOGY INCORPORATING AIR-FLOAT AUTOMATIC CENTERING AND MOTORSPINDLE. AIR-FLOATED TABLE FIXTURE CAN MAKE THE MOVEMENT OF WORKPIECES MORE FLEXIBLE.
ESPECIALLY DEVELOPED FOR THE REPAIR OF SMALL MOTORCYCLE AND AUTOMOTIVE MULTIVALVE CYLINDER HEADS.
| Model | TS60 | |
| Machine capabilties | Max. Length of the cylinder head | 600mm/23.62inch |
| Max. Width of the cylinder head | 400mm/15.75inch | |
| Max. Height of the cylinder head | 450mm/15.72inch | |
| Corsswise workpiece tilting | +42~-15degress | |
| Machine Capacity dia. (min-max) | 16 – 60mm / 0.63 – 2.36inch | |
| Work head displacement | 8mm/0.32inch | |
| Travel of working table | Lengthwise | 400mm/15.75inch |
| Crosswise | 8mm/3.15inch | |
| Spindle | Max. spindle inclination | 5degress |
| Spindle Travel | 200mm/8inch | |
| Power of the spindle | 1.5KW | |
| Spindle rotation speed | 0 – 1000RPM | |
| Alimentations | Power supply | 380V – AC – 3PH – 50HZ |
| 220V – AC – 3PH – 60HZ | ||
| Air Supply max | 6Bar/87psi | |
| Max. Air flow | 300 per min/ 11CFM | |
| Level of noise at 400RPM | 72dba | |
| Level of noise at 1200RPM | 82dba | |
| Net Weight approx | 600kg/ 1320lbs | |
| Machine space requirements | Length | 1400mm/55.12inch |
| Width | 900mm/35.43inch | |
| Height | 2000mm/78.74inch | |
paint booth Electric 3 Motor Normal doors
name Quantity/unit
Specification introduce
External dimensions mm 7000×5100×3200mm **
Internal dimensions mm 6900×3900×2450mm Subject to internal dimensions
door size 3 fans 3000*2400mm Three-folding sheet metal door, with glass
observation window, aluminum alloy latch
side door size 1 650*1800mm With explosion-proof pressure lock, door
handle, aluminum alloy edge
wall panel 1 set Thickness 50mm 50mm EPS board, density 8kg/m³, single-layer
thickness of outsourcing steel plate 0.326mm,
950mm wide. color: White
Hydrostatic layer
top bracket
1 set For total size 3.9m*6.9m 40*60 electro-galvanized square tube
Static pressure layer
filter cotton support
4 2860*1575*25mm spray, white
bottom bracket 1 40*40mm angle iron plus convex
steel
40*40mm angle iron plus convex steel, the
height is 280mm
Bottom plate
(painted)
Steel grating 2 lanes 30*4mm, 3
lanes 30*3mm steel grating
There are 5 grid plates, 2 channels are 53cm
wide and 3 channels are 90cm wide.
Blower (energy-
saving type)
1 set 1.5KW (380V/50Hz, three-phase) Top-mounted high-efficiency energy-saving
fan
induced draft fan 1 set 5.5KW (380V/50Hz, three-phase) Double inlet centrifugal fan
Deluxe Infrared
Roast Lamp
8 groups 3 per group, 24 in total There are 3 heating tubes in each light box,
each 1KW, and the heating tubes are
protected by a mesh to avoid burns by
operators
box 1 set Exhaust box Galvanized sheet bending package, 40*40
square tube frame
dome light 8 groups Each group of 3 lamps, each
lamp is 16W (T5 integrated LED
lamp)
Inclined ceiling light with transparent glass
cover (easy to dismantle);
Electric control box 1 380V/50Hz, three-phase power Delixi's main electrical appliances, with
leakage protection, temperature setting,
painting, baking paint, lighting, power switch,
emergency stop, etc.
filter sponge 1 set Three-dimensional spray top
cotton, initial effect tuyere
cotton
board 1 set 1500mm*530mm Two train boarding boards
C9 Coolant Flush & Exchange Machine 240 volt
Coolant Quick Exchange Machine
- C9 is designed for fast exchange coolant without any spilled or dropped coolant.
- Complete set of adapters for universal application, regardless of what kind of cooling system the vehicle has, if works from the radiator or from an expansion tank or reservoir, has all the adapters for any kind of vehicle whether is Asian, American, or European.
- Also has adapters to allow you to work from the radiator upper hose. Giving the mechanic several options on working methods.
- Pneumatic power source.
- Need to connect the machine to the shop's air compressor.
- Machine construction:
- 2L chamber for showing used coolant status (on the top middle of the machine).
- 11L tank for distilled water and flush chemical (CL45) (Front left tank).
- 11L tank for new coolant (G13) (Front right tank).
- These three tanks are totally transparent and have a special construction that prevents them from turning dark or yellowish over time, ensuring that they are always transparent to guarantee an adequate comparison between the liquids extracted and those to be filled.
- 20L drum for gathering used coolant (inside the machine's rear compartment).
[youtube https://www.youtube.com/watch?v=jg5XGnNO0EQ]
[youtube https://www.youtube.com/watch?v=AQqOM7XV0M4][youtube https://www.youtube.com/watch?v=e9pRaXz6fNs]
ECCOm PRO injector cleaner 6 cycliner GDI جهاز اختبار وتنظيف رشاشات البنزين
he EICOM ECM-X4/X6/X8 Pro is a professional gasoline injector testing and cleaning machine designed to ensure precision and efficiency in fuel injector maintenance. This advanced equipment is ideal for workshops, providing accurate diagnostics and effective cleaning for various injector types.
Key Features:
- Multi-Injector Testing: Capable of testing and cleaning up to six injectors simultaneously, saving time and increasing productivity.
- Digital Control Panel: Equipped with an easy-to-read digital display and intuitive controls, allowing technicians to perform tests and adjustments with ease.
- Ultrasonic Cleaning: Includes a built-in ultrasonic cleaning tank for thorough cleaning, ensuring injectors are free of carbon deposits and contaminants.
- Pressure Gauge: Features a pressure gauge to monitor fuel pressure during testing, ensuring precise measurements.
- Versatile Application: Suitable for different types of gasoline injectors, making it a versatile tool for a variety of vehicles.
This equipment is an essential asset for automotive service centers looking to provide reliable and efficient injector testing and cleaning services to their clients.
1.Main Machine
2.Luxury Accessories packing
list
3.Ultrasonic cleaner
4.Without cabinet
5.Big pump/external type
6.Dimension:
520mm*440mm*640mm
7.Weight: 28kg
8. 4.0 version
1.4.3 inch LCM screen color to show, Can show the
injector working dynamic. 2.With resistance testing, can show the date, with injector
working waveform and PMW to adjust the pressure. 3.With English, Spanish, Chinese lauguage, with 4G sd
card. 4 .Can test and clean GDI, FSI, SIDI, MPI SPFI, TBI, CFI, K-JET,LPG, Motorbike-injector. 5. Powerful external fuel pump for easy maintence and
long durability. 6. Can operate the auto static test, dynamic test and
selective test with the injecting dribbling, angles, atomization, uniformity of one or more (1-2) injectors, can
simulate any state of the vehicle to observe the complete
process of injectors
**جهاز اختبار وتنظيف رشاشات البنزين من EICOM - ECM-X4/X6/X8 Pro**
يعتبر جهاز EICOM ECM-X4/X6/X8 Pro جهازًا احترافيًا لاختبار وتنظيف رشاشات البنزين، مصممًا لضمان الدقة والكفاءة في صيانة الرشاشات. هذا الجهاز المتطور مثالي للورش ويوفر تشخيصات دقيقة وتنظيفًا فعالًا لمختلف أنواع الرشاشات.
**المميزات الرئيسية:**
- **اختبار متعدد للرشاشات**: قادر على اختبار وتنظيف ما يصل إلى ستة رشاشات في وقت واحد، مما يوفر الوقت ويزيد الإنتاجية.
- **لوحة تحكم رقمية**: مزود بشاشة عرض رقمية واضحة وأدوات تحكم سهلة الاستخدام، مما يسمح للفنيين بإجراء الاختبارات والتعديلات بسهولة.
- **تنظيف بالموجات فوق الصوتية**: يحتوي على خزان تنظيف بالموجات فوق الصوتية للتنظيف الشامل، مما يضمن إزالة الرواسب الكربونية والشوائب من الرشاشات.
- **مقياس ضغط**: يحتوي على مقياس ضغط لمراقبة ضغط الوقود أثناء الاختبار، مما يضمن قياسات دقيقة.
- **تطبيق متعدد الاستخدامات**: مناسب لأنواع مختلفة من رشاشات البنزين، مما يجعله أداة متعددة الاستخدامات لمجموعة متنوعة من المركبات.
يعد هذا الجهاز إضافة ضرورية لمراكز خدمة السيارات التي تسعى لتقديم خدمات اختبار وتنظيف الرشاشات بطريقة موثوقة وفعالة لعملائها.
Reviews
There are no reviews yet.