ILD-200 Advanced Refrigerant Leak Detector

Figuring out which injector is causing you problems can be slow, expensive, and frustrating. The GTC605 will help you find and fix the issue quickly, minimizing downtime, labor, and parts cost. This is the tool that’ll help you get that engine back in service!

The GTC605 combines many lessons from the GTC505 with some new, patent-pending technologies. Our Fuel Injection Analyzer can tell you exactly how injectors are performing, as well as what the control signals look like. Replacing all the injectors at once to save time is expensive and wasteful; the other common strategy of switching them out one at a time is a lot of work and takes forever. The GTC605 makes it so that you can go in with surgical precision and replace only the faulty injector(s), saving time and money.

Description

Who it’s For:

• Heavy-duty mechanics
• Marine technicians
• Anyone working on common-rail diesel engines

What it Does:

Quickly and easily detects fuel injector performance and control system parameters. Useful for locating stuck, clogged, and disconnected fuel injectors.

How it Works:

1. Turn the unit on
2. Position the sensor against the fuel injector to be checked
3. See the control signal, fuel injector power, and pintle movement timing and performance in real-time. Use the digital view to quickly check average parameters, and the chart view to check for periodic or infrequent problems.

Warranty & Support:

Covered by our standard 1-year warranty, and supported for much longer. Replacement parts and accessories are generally available for 10+ years.

Features

The GTC605 Fuel Injection Analyzer is a hand-held instrument designed and built for the diagnosis and performance measurement of all types of fuel injection systems, including almost all solenoid, piezoelectric, and mechanical injectors used on diesel, gasoline, and liquid natural gas engines. This tool is faster, easier to use, and more comprehensive than any fuel injector tester on the market, because of the unique (patent-pending) sensor system.

Useful for Troubleshooting:

• • Non-starts
  • Misfires
  • Intermittent problems
  • Injector coil circuit faults
  • Piezoelectric element cracks
  • Fouled or damaged injectors
  • Damaged electrical harnesses

Specifications

Analyzer

• Display: 3.5″ Color TFT LCD (320×240 pixels)
• Injector System Compatibility: solenoid, piezoelectric, and mechanical
• Engine Cycle Compatibility: 2-stroke and 4-stroke
• Cable: 2 m (74”) (30 cm) coaxial cable with BNC and sensor connector
• Injector Sensor: Active type, 65 mm x 14 mm
• Input USB-micro Connector: 5.0 volt, 500 mA maximum
• Internal Power Source: 1500 mA/h rechargeable LiFePO4 battery
• Battery Life: 5 hours of working time when starting with a fully charged battery
• Power Saving: Auto power off
• Physical Dimensions : 6.5″(H) x 4.9″(W) x 1.4″(D) or 165 mm x 124 mm x 36 mm (without cable or sensor)
• Weight: 14.8 oz or 420 g (without cable or sensor)

Sensor

Unique 3-Channel Sensor

• Compact for ease-of-use: 14mm*65mm (9/16″x 2 1/2″)
• Fully sealed and encapsulated for durability
• Patent-pending sensor system for optimal signal detection and rejection of interference from other modules
• Specially designed for use with the GTC605
• Automatically detected, calibrated, and configured by the GTC605
• Replaceable in case of damage or loss
• 2 m (74”) shielded coaxial cable with BNC and sensor connectors

• HANDHELD: Single hand range and scale selection while testing
• EASY TO READ: Large easy to read 1/2″ (12.5 mm) digits display
• ERGONOMIC: Comfortable grip allows holding as a pen or a handle
• DURABLE: Rugged plastic enclosure
• 1-YEAR WARRANTY

Description

This meter offers an easy and portable solution for troubleshooting electrical and electronic circuits and systems. With its large and easy to read display, you can use this device with one hand and keep sight of your testing point while reading the display. You can measure outputs in sensors, check grounds, voltage drops, and continuity across cables, and check components like alternators, diodes, fuses, and more.

Applications

• Measure output in sensors like Oxygen (O2), Coolant Temperature, Throttle Position (TPS), Manifold Air, Pressure (MAP), Manifold Air Flow (MAF), etc.
• Check grounds, Voltage drops and continuity across Connectors, Wires, Cables, Relays Contacts, Lamps, Switches, etc.
• Check components like Alternator, Diodes, Relays Coils, Condensers, Ignition Coils, Spark Plug Wires, Magnetic Pick-ups, Motors, Switches, Fuses, etc.
• An essential tool for all around troubleshooting of electrical and electronic circuit and systems

Specifications

• DC Voltage: ±0.8% + 1dgts., 1MOhm input impedance, 600 V ac/dc Overload protection
• AC Voltage: ±1.5% + 10 dgts., 450KOhm input impedance, 40 to 200 Hz, 600 V ac/dc Overload protection
• Resistance: ±1.0% + 3 dgts., 250 V ac/dc overload protection
• DC Current: ± 2.0 % + 2 dgts., Internal 200mA/250V fuse protection
• Diode test: 1.0 ± 0.6 mA test current, 3.2 V max. test voltage

Documents

 
  Download Manual (English)
 

Kit Manifest

• CT8012
• Probe protective cap
• Alligator clip adapter for test probe
• 1604A (9-volt alkaline) battery
• User’s manual

Proposition 65 Warning ⚠

This product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer, and Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm.